On 8/31/2010 12:34 PM, Chuck Kelsey wrote:
> Yes, a screwdriver is your friend.
>
> Chuck
> WB2EDV
>
>
> - Original Message -
> From:
> To:
> Cc:
> Sent: Tuesday, August 31, 2010 12:21 PM
> Subject: Re: Re: [Repeater-Builder] Running a Mastr II Repeater QRP
>
>
>>
>> Installed a MSTR II VHF
On 8/31/2010 2:05 PM, ka9qjg wrote:
> OK Great , Thanks to Everyone who answered , I will sleep better now
> one less thing to worry about
>
>
>
> Don KA9QJG
Not the same thing, but something else to remember: Mount them
vertically! If you mount them horizontally, you run the risk of the
rods wa
A screwdriver is your friend...
Try going to the repeater site leaving your tools at home. It only takes one
stubborn screw to drive you nuts. Fortunately, friends took pity on my
stupidity and brought my tools to the bottom of the hill. 10 seconds and the
proper tool and life was good. A
Greetings,
I am in a particularly sticky situation with one of my two meter repeaters in
Lakewood, WA (Tacoma). I have generally great coverage, however there is a very
annoying problem with multipath and raspy signals in a large portion of my
coverage area. Since the Puget Sound area of Weste
http://www.qsl.net/n9zia/cir_pol_rpt.html ?
To: Repeater-Builder@yahoogroups.com
From: gary.k...@yahoo.com
Date: Thu, 2 Sep 2010 02:44:16 +
Subject: [Repeater-Builder] Circular polarization for VHF repeaters?
Greetings,
I am in a parti
Gary,
I am in Southern Oregon and I understand exactly what you are experiencing. We
have very similar problems down here with our club's repeater. I have often
talked about and even done some serious looking at remodeling a set of
broadcast loops and harness for 2 Meters.
I know there was a so
On Thu, 2 Sep 2010, Gary - K7EK wrote:
> In the 80's there was a amateur radio repeater book by a fellow,
> Pasternak I believe, that took two gamma match style Cuschcraft Four
> Pole antennas, combined them, and did some magic with phasing lines to
> end up with a four bay circularly polarized
Hi,
I remembered circular polarization was used for FM broadcast due to FM car
radios, but when I looked it up I found out some interesting facts, see the
link below,
https://www.digitaltraders.com/index.php/index.php/components/com_kunena/template/default_ex/templates/ja_edenite/index.php?option=
FM broadcast is NOT changing to vertical polarity!
Most stations today are going on the air with either circular polarity or
cross polarity (consisting of signal in BOTH the vertical and horizontal
poles)
With FCC licensing today, a FM station licensed for 10KW can have 10 KW in the
vertical plan
FM Broadcast started out Horizontally polarized. Circular
polarization was later authorized under 2 stipulations. The vertical
plane power can not exceed the horizontal power ERP, and the
horizontal plane ERP is used for the stations ERP. So a station with a
horizontal antenna can effectively doub
10 matches
Mail list logo