I have a pair of 2C ICM compensated icoms on 70cm ham. they have not been used
and are still in the bags that ICM put them in. RX is 449.525mhz TX is
444.525mhz. email me off list at do...@_engineeringinc_._com (remove the _'s
in the email address) if you are interested and we can work
try again. I am a network engineer and I can tell you all it takes is one
mistake or routing loop extended power failure etc and your down for a while.
Anyone who would even think about doing this over the internet needs their head
checked. Ask yourself this question... If your power goes
Do not stay in miamisburg. You will be sorry.
We had 30 messages about drugs on our room voicemail.
Also when my other friend checked in someone said ‘welcome to hell’ to him.
This was at the studio 6 in miamisburg. There also was when the miamisburg PD
almost rear ended my friend who was
Hi,
I have 100+ (There is at least 100ft of it here probably more) feet of brand
new (has been caped with electrical tape since I bought it) Andrew AVA5-50
hardline that is available in Boise, ID. I wont ship this because its
heavy! Should you be interested somewhat local I will part with it
Hi All,
I have 3 UHF mastr II stations for sale. These are the radio portion only.
I do have the heavy power supplies they came with but I highly doubt
you want to pay the shipping (if interested please ask)
1) DC75YAS88B (I am going off memory) 100w UHF station that was previously
operating in
Of Don E. Wisdom
Sent: Wednesday, March 04, 2009 10:03 AM
To: 'repeater-builder@yahoogroups.com'; 'ge-mast...@yahoogroups.com'
Subject: [GE Mastr II] For Sale 3 GE Mastr II Stations ICOMs
Hi All,
I have 3 UHF mastr II stations for sale. These are the radio portion only.
I do have the heavy power
I would be interested in purchasing one of those. Can you give me a idea of
what you want $$ wise for the IFR the moto one?
Yes I am still in boise
--Don
-Original Message-
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of Ham-Radio
Sent:
Hi All,
I have decided to sell the rest of the equipment that was on my repeater
that isn't getting built.
I have for sale the following things:
Telewave T1050B Dual isolator tuned to 444.575 (the paint is a little
roughed up on the loads but works 100%)
Pictures:
By the way the duplexer is BpBr
--Don
On 2/12/09 8:06 PM, Don E. Wisdom d...@engineeringinc.com wrote:
Hi All,
I have decided to sell the rest of the equipment that was on my repeater
that isn't getting built.
I have for sale the following things:
Telewave T1050B Dual isolator tuned to 444.575
There are a LOT of professional people (myself included) who don't regularly
carry a cell phone. I have been known to leave my cell phone in a lot of
weird places. I have a lot of problems with the reliability of cell phones
not being able to send a message via a dial up modem isn't alluring
Hi,
I have a RC-210 for sale that is in the Arcom rack enclosure with the
autopatch (AP1) module. It was built by me was in full operating
condition when I was doing burn-in on my repeater that I have scrapped. I
would like to get $400 OBO for it. Please email me off list if you are
Have fun with the fcc enforcement people because that has no place in the biz
uhf band let alone is it what its designed to be used for.
-Original Message-
From: Steve [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com Repeater-Builder@yahoogroups.com
Sent: 12/27/2007 11:47 AM
I wouldnt do it if it was a former long lines site (aka owned by american
tower)
They make everything a PITA and you also have to get a radio engineer to do
your site design.
-Original Message-
From: Repeater-Builder@yahoogroups.com on behalf of Bill Hudson
Sent: Fri 6/15/2007 21:19
Hi All,
Does anyone know what charging current the Mastr II battery charger / battery
revert option supplies to the batteries? Is using this a good idea or a bad
one? I highly doubt its a smart charger or has a trickle function to float
batteries. Im looking at using the charger thats
Its on the master index. Mastr II - INTERNAL BATTERY STANDBY CHARGER OPTION
BC01 (9669), 9670 AND 9771 LBI30869L. Its the stock ferro power supply. I
would assume its part # is 19D430272G1
--Don
-Original Message-
From: Repeater-Builder@yahoogroups.com on behalf of Mike Morris
Hi All,
Im looking for a Mastr IIe / III PA Power connector that plugs into the back of
the Mastr III Power Supply. I just need the connector with some wire
Thanks
--Don
KD7WKF
16 matches
Mail list logo