Re: **Possible Spam** [Repeater-Builder] Re: Msf5000 Low Power alarms

I think that it is looking for an input on the RCA jacks on the SSCB. Mine does not have anything connected to these. I could be wrong. Jimmy On Mon, 2010-08-30 at 16:47 +, Bill wrote: > > > Ok, I'll ask the easy question, why not let it be happy with the > proper input to the sscb input

Re: [Repeater-Builder] Msf5000 Low Power alarms

That did work. That's cool. Is there anyway to save it to the radio? When I reset the radio the problem comes right back. Thanks again. Jimmy On Fri, 2010-09-03 at 17:01 -0400, MCH wrote: > > How do you set it back to normal? > > Joe M. > > Richard Arnold wrote: > > > > > > There is a

[Repeater-Builder] MSF alarms fixed finally

Ok, I entered the IPCB command, then without resetting the machine I loaded the conf.def file and rebuilt my codeplug. This worked now I can reset the machine and have no alarms. Richard, thank you very much for the help. Jimmy

[Repeater-Builder] UHF Maratrac: Low power in ham bands

I have a Maratrac that will only make about 20 watts at 446.500 and almost nothing a little below that. At 448.00 and above it makes full power. I have another Maratrac that makes full power down to 440.000. I did not check it any further. The radios look a little different inside. The one that has

RE: [Repeater-Builder] UHF Maratrac: Low power in ham bands

Bob M. Thanks for the tip. I did the alignment. It was a little quirky but I finally got the radio performing to my satisfaction. It does 100 watts plus, from 440-450. I turned it down to 80 of course. Now I have to decide if I want to "waste" a good Maratrac as a repeater transmitter. Maybe, I

RE: [Repeater-Builder] Re: Celwave Stationmaster part identification help needed - RFS is useless

Is this what you are looking for? http://www.mouser.com /search/ProductDetail.aspx?R=1327505virtualkey6780virtualkey678-1327505 Or this part number on this page? RFN1034-1 http://

RE: [Repeater-Builder] Maratrac without control head

Ok, I did connect the positive and negative. I just didn't mention them. I programmed it as a clamshell also, forgot to mention that in original post. I have two radios that have the same problem, my only two of course. These do have the A7 head. _ From: Repeater-Builder@yahoogroups

RE: [Repeater-Builder] Maratrac without control head

I finally got it working. I went back to a known good codeplug. Then, I changed it to a clamshell control head. It would then transmit, but on wrong channel. I deleted all but Mode 1. It works! It also transmits PL. It seems from reading back through old posts that some have had trouble getti

RE: [Repeater-Builder] Re: Motorola Maratrac

In addition to the software, the UHF has two power control pots inside the radio. I'm not sure about the VHF. I have one but, it's been mounted and operational for years. I will go look this afternoon if you need me to. Jimmy, KS4KX _

RE: [Repeater-Builder] Duplex coax types

I have used the 1/4" stuff with the PL-259s before. I haven't tried the N's. I'll have to check my collection for some that are large enough. Jimmy, KS4KX