You might have a battery going bad or something wrong with bridge rectifier
- Original Message -
From: "Dave VanHorn" <[EMAIL PROTECTED]>
To:
Sent: Sunday, May 14, 2006 10:32 PM
Subject: [Repeater-Builder] Re: Temp on a bridge rectifier, anyone know
>
>> Currently the temp of the re
- Original Message -
From: Kevin Custer
To: Repeater-Builder@yahoogroups.com
Sent: Friday, January 05, 2007 9:10 AM
Subject: Re: [Repeater-Builder] Re: Need Help... where can I buy a
DSL-Internet repeater...?
I wouldn't try stacking those get a lot tighter when stacked s
Warren
I happen to have a cophasing harness for 4 - 1/4 wave length dipoles , I
also have antennas somewhere ,Was used for 154 mh but could be tuned for 144
to
148 mh These have "N" connectors, If you build one you have to use 75 olm
,RG 6 or RG11 , to make a match, If you are co phasing beams I
John
I have had a few dealings with Campers in general wiring etc. I they
use White for Ground on AC and Neg on DC.
in general they don't come up to "code' some of older ones will not work
with Ground falt breakers they wave in most Camp grounds.
if you will tell me what you
Ian
The Cheap Home built towers will get you and
someone else "Hurt Bad". The Co I used to work for to try to save
money & bid Jobs for less would install antennas on 4 x
4 inch "US" 24 ft Tall Treated wood poles Set inn ground Then
Add about 10 ft mast to top. Giving th
I might have an amp for a low band but will check Numbers and get back with
you
Dale N8SAC
- Original Message -
From: "Charles Greene" <[EMAIL PROTECTED]>
To:
Sent: Wednesday, November 09, 2005 5:56 AM
Subject: [Repeater-Builder] Micor VHF
Kerry
I use Dow Corning # 111 Non Dielectric Grease but do not recommend above
high band VHF also works
on Low band . Just a matter a matter of your preference some don't like or
recommend it but have used 30 years . Have gone back to sites 10 years later
opened up fittings looked brand new i
If You Want I have A unit out of A WV State Police Car With UHF To Low Band
VHF With Cables to Interconnect Would Might be able to use High Band radio
in place of Low Band I think they are Micor
DaleN8SAC
- Original Message -
In A duplex repeater is A repeater that Receives on one FREQ. and Tx. on
another at the" same time".that is the reason for a deviation . There are
also Simplex repeaters that tx & re on same FREQ.
DaleN8SAC
- Original Message -
From: "hussin reda
If you make a harness for that antenna use RG-59 or RG-11 - 75 ohm Cable
to get match , don't use RG-58 or RG-8 it won't work , and it doesn't have
to be Cushcraft can be other brands many manufactures made them I have one
made by Hy Gain it also has "n" connectors. Worked better than a lot of
I have used both LMR & the small hard line I dont think much of ether
one might be alright on short
run but line loss is a problem with both . Spend money and get larger hard
line will be cost less in long run
FIX RIGHT FIRST TIME , and you won't have to go back and do over .
11 matches
Mail list logo
