Looking for another one for a project.
Let me know if anyone has one they want to part with.
Thanks
Disconnect the antenna at the duplexer and replace with a dummy load.
Does the problem still exist ?
http://groups.yahoo.com/group/Radio_Mobile_Deluxe/
is the group dedicated to the programming
Anyone have a set of surplus Mastr II icoms available ?
does the relay have a diode installed across the coil ?
is it the correct polarity ?
Hi all. We recently moved our Micor UHF and VHF repeaters to my home.
However, the move seems to have broken the TLE1703A amp on the UHF
repeater; Does anyone here have the schematic for this amp? The
TLD5492A4 exciter is putting out 700mW as well which sounds a bit
high. If anyone has the alignmen
TLD2601A I believe this is a lowsplit VHF amplifier
What is the DC power requirement ?
What is the drive required ?
How much power out ?
Tnx
tic SO-239 coax connectors with
better quality parts.
> "Phil" <[EMAIL PROTECTED]> wrote:
>
> I have a set of t1500 series cans that i need to know if they are 250
> watt or 60 watt. How can i tell? Was wondering because i ended up with
> melted notch coupling
I have a set of t1500 series cans that i need to know if they are 250
watt or 60 watt. How can i tell? Was wondering because i ended up with
melted notch coupling insulators. I was running 75 watts to the
duplexers.
Be on the lookout for three stolen Motorola MTR2000 UHF repeater
stations.
Thieves removed the units from a locked building on Tassajera
Peak on
Sunday, October 14th, between 1530 and 1600 hours local time.
They are all model T7566 stations, rated at 100 watts f
What freq range board ???
I'm going to try converting a Purc station to repeater operation. I
know that I will need a receiver board..does anyone have any spares
laying around?
If this doesn't work I will be forced to replace the Micor chassis
with my GE MVP and use the PAs for it
Try this unit, hooked to a receiver at the site.
http://www.dschmidt.com/dtmf.html
might take a look at a Quantar if you already have one, or even a Mastr III can
be upgraded (if not already)
We've successfully deployed Daniels and Quantar repeater setups w/ P25.
-
Want to start your own business? Learn how on Yahoo! Small Business.
I'm on yahoo via a T1 and I'm seeing your reply, but not my initial post.
how would an ISP be the issue? Does this reflector not reside on Yahoo?
Don KA9QJG <[EMAIL PROTECTED]> wrote:
They will never be in Order, because everyones Internet Provider
is Different and send thing
Gentlemen,
It has my experince that pretty much all* the manufacturers of equipment in
our field are very helpful. All it takes usually is a phone call or email and
you can get all kinds of info.
*now, a certain 'bat wing' company may be the exception if you don't have an
account
we have a regular rib and a smartrib, we also have one of those aftermarket
"clones".
the moto ribs read everything, but we had problems with the 'clone', we had
problems reading some moiles.
I'd give it a try if money is an issue and you don't have a bajillion
customer radios and ne
You can probably find all those OM's on 75m talking about their latest trip to
the doctor!
Don <[EMAIL PROTECTED]> wrote: Now for Some Real Entertainment go here
http://tinyurl.com/2h2mpc Turn
on the Speakers, some of us are actually old enough and remember the
FCC being like this.
73
we deal mostly with LMR400/600 and LDF. The numbers look good for LMR1200 up
into 70cm. If the price is right, why not?
Reminds me of the free roll of 1/2" heliax (new) at one of the previous
places of employment (yes it was free, not "free" because I made it that way) :)
Dan Blasberg
ntenna
both at 5.5 feet
TO is talk out
TB is talk back
73
Phil, K6LS
"Tony L." <[EMAIL PROTECTED]> wrote:
Is there someone with a good VHF/UHF propagation software progam on
their computer who wouldn't mind running a plot for me? I can't se
I can do it too, but will be sometime this weekend when I can do it.
I'm using comstudy,
I'll need the following:
Lat/lon
freq
antenna model & gain
antenna height
feedline type & length
losses (cavities, duplexer, etc...)
mode if not FM 25k
that should get you a
Addendum to my offer...
I'll only do it for an amateur radio application. so include repeater
callsign.
(I do this for a living, anything commercial would be a conflict of interest)
"Tony L." <[EMAIL PROTECTED]> wrote:
Is there someone with a good VHF/UHF propagation software p
what equipment are you using now?
astron makes a automatic switch (it automagicly switches from AC to DC with
loss of AC)
there are a couple other makers, I'm sure.
you'll also have to consider battery charger(s) too.
wm5c <[EMAIL PROTECTED]> wrote:
Hi,
New member here. T
a "bump" if you will as site traffic has increased and the holidays are basicly
over.. tnx.
radiomog <[EMAIL PROTECTED]> wrote:
Hi.
I'd like to know if there is a technology using COTS products to take
multiple repeater audio's at site A and send them via RF link to site
B, to be bro
I just spoke with some people at the NTIA yesterday...
deadline to get things done is 31 Dec xx, everything 1 jan xx and after must
be updated.
"Jim B." <[EMAIL PROTECTED]> wrote:
skipp025 wrote:
>> "Jim B." <[EMAIL PROTECTED]> wrote:
>> Umm-I got a question-are you converting the
what are your specifications?
you should be able to find a new/used small mobile dulexer. (phelps/dodge
comes to mind)
Jeff Kashinsky <[EMAIL PROTECTED]> wrote:
1. I'm new to the list.
2. I've done a searh of past messages and can't find anything.
3. I'm building a portable 70c
I can look into this but I do believe that is correct we have some in our
agency I will look in the cps and see. Email me off the group charlie and
we will see what we can break (lol).
Phil
- Original Message -
From: "Charles Mumphrey" <[EMAIL PROTECTED]>
To:
Sent: Th
I use the ID-O-MATIC and it takes about 10minutes to make it and is very
user freindly with hyperterminal.. I have use these many times and
currently have one in my VHF repeater. When the old burn only prom needed
to be changed I just used this item instead and wired it in. $28.00
73 Phil
http://www.qrz.com/
I just tried it and it works fine here.
--- Ron <[EMAIL PROTECTED]> wrote:
>
> --- Doug W7FDF <[EMAIL PROTECTED]> wrote:
>
> > I tried earlier this morning [around 830am
> Thursday].
> > I tried just before I left home [this morning] for
>
> > work [around 1230pm] and I t
We had one case where a Micor receiver would hear faint shortwave signals in
spanish for about one hour each evening, for weeks. Traced it to the sheild
covers being left off of the receiver. Sheilds on, no more problem.
>
> I see this as a good example of having a repeater that can
> operat
All of this discussion on the receiver combiners set me to wondering ..
What would be the simplest/easiest/cheapest way to combine a 420 repeater
and a 440 repeater into the same antenna ?? Stated another way; connect a
420 and 440 duplexer to the same feedline.
Separate antennas not availa
- The following
addresses had permanent fatal errors - <[EMAIL PROTECTED]>
- Transcript of
session follows -
... while talking to
air-xn04.mail.aol.com.:
>>> RCPT To:<[EMAIL PROTECTED]>
<<< 550 MAILBOX NOT
FOUND
550
<[EMAIL PROTECTED]>... User unknown
www.tcstx.com/software/intermod/intermodulation.htm
Try this site
--- fraser3914 <[EMAIL PROTECTED]> wrote:
>
>
>
> Hi has anyone any software for calculating
> intermodulation products
> that is for free issue,,rgds
>
>
>
>
>
>
>
>
>
>
>
> Yahoo! Groups Links
>
>
> [EMAI
For years we have successfully used a cwid @20wpm below 300 hz, and at about
1.5 khz deviation.
Most radios will filter this out.
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
<*> To unsubscribe from this group, sen
>From a previous post:
Subject: Re: Motorola 16 Pin Accessory Plug Part # Digi-Key
For anyone who would like to order the sixteen pin accessories plug and pins
for the Maxtrax, here is the information from Batlabs.
If you would rather build your own accessory cables, the parts are available
from
A CAT 250 will do three tones for you
www.catauto.com/ "DIGITEL S.A." <[EMAIL PROTECTED]> wrote:
hi everyone, just wonderind if anyone know which is the repeater controler that makes a nice 3 tones courtesy beep at the end of the transmitions, i have a customer that wants to have in ther pri
Does anyone have any spare/unused ICOM's on the following freq's , before I
have to order xtals?
MASTR 2
449.275 tx
444.275 rx
449.225 tx
444.225 rx
449.300 rx
444.300 tx
449.225 rx
444.300 rx
Tnx & 73's
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://group
Not any more, only links to TKR 750/850 family
-Original Message-
Subject: RE: [Repeater-Builder] Kenwood Repeater
Go to the systems portion on the site..you'll then see the 900 repeaters.
Gregg R. Lengling, W9DHI, Retired
Yahoo! Groups Links
<*> To visit your group on the web
Of course it wont go for .01$, didnot think you could bid on something and keep
your id private. WTF overdoug <[EMAIL PROTECTED]> wrote:
this is a no reserve auction, .01 or ??? winsihttp://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&rd=1&item=3834443644&ssPageName=STRK:MESE:ITdougYahoo! Groups Links
38 matches
Mail list logo