Mike, I am sitting here wondering if a nasty-gram would be considered
"enforcement"? If they are two different things then looking in the
enforcement section might not be the right place.
Randy
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of Mike B
: [Repeater-Builder] TKR-750
The service manual is in the Kenwood section of the sight.
Jeff
_
From: Repeater-Builder@yahoogroups.com
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of Randy Brumback
Sent: Friday, April 10, 2009 4:06 PM
To: Repeater-Builder@yahoogroups.com
gt;
<mailto:Repeater-Builder%40yahoogroups.com>
<mailto:Repeater-Builder%40yahoogroups.com> >
Sent: Tue Apr 07 12:57:47 2009
Subject: Re: [Repeater-Builder] TKR-750
At 10:18 AM 4/7/2009, Randy Brumback wrote:
>I need to tune the VCO for my amateur frequency in the TKR-750
uilder@yahoogroups.com
<mailto:Repeater-Builder%40yahoogroups.com>
<mailto:Repeater-Builder%40yahoogroups.com> mailto:Repeater-Builder%40yahoogroups.com>
<mailto:Repeater-Builder%40yahoogroups.com> >
Sent: Tue Apr 07 12:57:47 2009
Subject: Re: [Repeater-Builder] TKR-750
At 1
der%40yahoogroups.com> mailto:Repeater-Builder%40yahoogroups.com> >
To: Repeater-Builder@yahoogroups.com
<mailto:Repeater-Builder%40yahoogroups.com> mailto:Repeater-Builder%40yahoogroups.com> >
Sent: Tue Apr 07 12:57:47 2009
Subject: Re: [Repeater-Builder] TKR-750
At
I need to tune the VCO for my amateur frequency in the TKR-750. Does this
unit need to be hooked to the computer and set in some way before tuning? I
am at the very low end of what the repeater will program to at 147.060 and I
can't get the right voltage on the Test Point by tuning the capacitor. T
If you are looking for a bottom feeding meter that does ok and is cheap, RF
Parts has a Diamond SWR and Power Meter that it says is very close to the
Bird 43 as far as accuracy. That is what they have listed and not my
research.
Randy B.
W4CPT
From: Repeater-Builder@yahoogroups.com
[mailto:[E
I have an in-band repeater in VHF High that does not use cans and is a
couple of megs apart, but I had to use two antennas and separate them as far
as I could. The output of the repeater to handhelds was only 500 millawatts.
I can only say that two antennas may help some.
Randy
From: Repeater
Anyone have a Mastr II set for 147.060 and 147.660? a 5C set will do.
Randy
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] On Behalf Of Mike Morris WA6ILQ
Sent: Friday, August 29, 2008 10:16 PM
To: [EMAIL PROTECTED]; repeater-builder@yahoogroups.com
Subject: [Repeater-Buil
er%40yahoogroups.com>
> [mailto:Repeater-Builder@yahoogroups.com
<mailto:Repeater-Builder%40yahoogroups.com> ] On Behalf Of Randy Brumback
> Sent: Wednesday, October 22, 2008 10:11 PM
> To: Repeater-Builder@yahoogroups.com
<mailto:Repeater-Builder%40yahoogroups.com>
>
These are great to use with an amplifier where you can back the 45 watts
down and keep the unit cool. Scott, contact me with a price if you would
please.
Randy
W4CPT
brumback at prtcnet.org
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] On Behalf Of Scott Zimmerman
Sent: We
Does anyone anywhere sell just the male pin and female pin for N connectors?
I have many good cases but because of arching I can't use the pins.
Randy
W4CPT
There is a way to report this email to fleaBay and I have done it before.
You would need to go to "Options" then "Source" then highlight all the
information and click copy. Then paste it in an email to fleaBay and they
will take it from there. That is if you want to go to the trouble of helping
the
13 matches
Mail list logo