Hi all, If any of you radio builders out there have built the NJQRP DDS board or any Analog devices AD9850 based project, you probably noticed right away, as I did, that there are very few ways of controlling the AD9850 DDS chip "On the fly". I just wanted to share with the group a piece of software I wrote for the Basic Stamp2, to load frequencies that are directly entered to a Basic stamp via a 4x4 keypad ($7.00 from Jameco). Stamp code to do this might already exist, but I was not succesful in finding any. I realize that there is already code for PIC's out there but many of you might agree with me that it is easier to customize Stamp code. My code can be downloaded from http://kr7k.pecnet.net Hope it helps someone out with their DDS Project - it sure helped me... 73, Wade - KR7K Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/