--- In Repeater-Builder@yahoogroups.com, va3vkk [EMAIL PROTECTED]
wrote:
Repeater controller
RC 1000 Micro Computer Concepts
I have enabled all the necessary options including dial 9
but can't get connected to the line
Perhaps some one can tell me what needs to be enabled for the
patch to
If you don't have a manual, it can be downloaded here:
http://www.repeater-builder.com/micro-computer-concepts/rc-1000-
manualtext.html
Looks like the last part got orphaned, even with . You'll have to
cut and paste I suppose.
RG
Yahoo! Groups Links
* To visit your group on
I got the book, whatcha want to know?
RG
Oh yeah, I subscribe by digest, so you may want to email direct -
although I did get 5 digests today :-)
RG
Yahoo! Groups Links
* To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
* To
--- In Repeater-Builder@yahoogroups.com, k0jxi [EMAIL PROTECTED]
wrote:
Just wonder if anyone has used two 450 Delta S model radios with
one as the receiver and one as the transmitter for a repeater
Thinking that the narrowband models might have the needed isolation
for installation
See:
http://www.qsl.net/n1gnn/alignmen.htm
You will need to replace some parts to get it to work. I have one working on
53.01 tx but it was a pain, required some cap changes and still didn't want to
tune up too well. If you can get your hands on a low band mastr II they seem
to go up there
Brad,
I too have a Sinclair Q2220 duplexer with a mastr exec II and it does not work
very well at the 50 watts I am running. Like Mr. Lemmon said, if I were
running 10 watts, it would probably work okay, but I'm not so it doesn't.
Good thing I have other receivers, or the repeater wouldn't
6 matches
Mail list logo
