Yes Mike...
I'll put my hand up if this article I have here is of any use.
It's an old yellowed original bulletin # 37383C by Andrew Communication,
with explicit instructions on preparing & fitting N connectors to
LDF4-50A Heliax.
I did a quick "search" on their web page, but it didn't come up.
It
With RingFlare connectors it is basically the same procedure
for 1/2 and 7/8, DIN and N.
The main thing is to strip the correct amount of insulation off and the
center conductor needs to be the proper length. Although when you first
look at the instruction sheet it is confusing, once you read th
Hi
You Might try these folks for the seals and pins.
TESSCO.COM
KA4DKJ
Ralph
- Original Message -
From: Ronny Julian
Sent: Monday, October 29, 2007 8:08 AM
To: Repeater-Builder@yahoogroups.com
Subject: Re: [Repeater-Builder] An interesting article request...
If Tony is out there
If Tony is out there listening... I have two connectors and a roll of
1/2 inch Andrews that need installation. See me this weekend and I'll
bring the needed items and a digital camera to the hamfest. Over
K4RJJ Ronny
Mike Morris WA6ILQ wrote:
>
> Repeater-builder received an interestin
Repeater-builder received an interesting article request...
Too many of the folks that have been "doing it" for a while
forget that we all had to start somewhere.
> "Everybody" seems to know how to install Heliax connectors but
> us newbies. And sometime the newbies don't know who to ask.
> An
5 matches
Mail list logo