Mint Like New Condition Very Low Hours! 1: Yaesu VXR7000 UHF Repeater. Retail Cost $1269.99 2: Programming software: 3: Fiplex DVN4522L UHF Duplexers. 4: Advanced Receiver Research UHF Pre-Amp/N connectors 5: Coax RG142 Jumpers N connectors 6: SCOM 7K External Controller 7: Interface Cable for Controller to repeater http://www.vertexstandard.com/indexVS....hived=0 Specifications: Vertex Standard - VXR-7000 50W VHF/UHFDesktop Repeater With a long list of built in features, the VXR-7000 Series Base/Repeater Station sets the standard for mid-power, continuous duty base station and repeater applications. This unit offers unmatched features for all segments of industry and Public Safety. Whether used as a base station, with its attractive housing and user- friendly controls, or as remote repeater in the most demanding environments, the VXR-7000 will provide years of reliable service. The VXR-7000 is a base station / repeater. As a base, it can be used with the optional MD-11A8J desktop microphone. It has a front facing speaker for loud and clear receive audio and 16 channels to select from. The built in DTMF decoder is a perfect fit with our Emergency and ANI functions built into our mobiles and portables ! As a repeater, it has a built in multi-tone feature that allows it to operate up to 16 sub-audible signaling tones on a single channel ! It can also be used at the same time as a full featured repeater and a base station. If the dispatcher presses the PTT, it automatically switches to base mode and switches back to repeat mode as soon as the PTT is released.
Fiplex DVN4522 Duplexers: Retail Cost Direct from Fiplex: $900.00 Specifications: Fiplex DVN series are efficent duplexers, made up of four coaxial cavities, able to be installed in a 19" cabinet. These duplexers are intened to be used in high power applications, or when there is small TX-RX separation. Around the Pass frequencies, these duplexers display a Quasi band pass response, providing additional selectivity that protects the receiver against interferences and reduces the noise and spurious emission of the transmitter. Good thermal stablility is obtained by a fine design and by the use of IVAR rods to control the tuning of each resonator. All equipment is in like Mint condition with almost no talk time hours! The repeater was just serviced from Vertex still bubble wrapped! More than 2 years of complete service Warranty still on repeater. Fully transferable! I was going to place this immediately on the air but decided to go with a Motorola MSF5000 instead! I am looking for either a complete FT847 or TS2000 radio\tuner package or cash. Please send inquiry to: [EMAIL PROTECTED] Fiplex Duplexer Website http://www.fiplex.com Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
