amateur frequency.
Milt
N3LTQ
- Original Message -
From: Ed Yoho w6yj_ya...@67hz.net
To: Repeater-Builder@yahoogroups.com
Sent: Saturday, May 29, 2010 12:09 AM
Subject: Re: [Repeater-Builder] Help Needed (Guidance and advice) tuning a
DB Products Duplexer
Josh wrote:
Ok so here's what I've
Hello Josh.
Look under the caps between the coax connectors.
That should be the notch adjustment.
They may not go that low,but all you can do is try.
Good luck.
Butch, KE7FEL/r
On Fri, May 28, 2010 at 6:53 PM, Josh josh.kit...@gmail.com wrote:
Ok so here's what I've got (I think)
Ok so here's what I've got (I think)
http://www.n2ckh.com/FORSALE/REPEATERS/DUPLEXERS/DB4076/DSC02678.JPG
Hamvention special, 4 cavities, appears to be a DB Products
4076 family unit. My bench tools: HP 8924c w/ Spec Analyzer
and Tracking Generator.
There was a guy at the Hamvention
Ok so here's what I've got (I think)
http://www.n2ckh.com/FORSALE/REPEATERS/DUPLEXERS/DB4076/DSC02678.JPG
Hamvention special, 4 cavities, appears to be a DB Products 4076 family unit.
My bench tools: HP 8924c w/ Spec Analyzer and Tracking Generator.
My problem - existing set of cans is tuned
Josh wrote:
Ok so here's what I've got (I think)
http://www.n2ckh.com/FORSALE/REPEATERS/DUPLEXERS/DB4076/DSC02678.JPG
Hamvention special, 4 cavities, appears to be a DB Products 4076 family unit.
My bench tools: HP 8924c w/ Spec Analyzer and Tracking Generator.
My problem - existing
5 matches
Mail list logo