[Repeater-Builder] IFR 1600S Problems

My IFR 1600S is giving me a couple problems. One is it appears to have some high frequency noise in the received audio, but the generated signal and audio looks and sounds clean. I am thinking maybe some caps in the power supply might be causing this problem. I have the three inch thick

Re: [Repeater-Builder] IFR 1600S Problems

Dont know for sure on the 1600, but for future reference the calibration password on the IFR-1900CSA is CSMATE which will have to be input from the keypad with the shift engaged. Apparently it is written in the service manual, which I don't have. With that said you should probably stay out of

RE: [Repeater-Builder] IFR 1600S

] On Behalf Of Gary Hoff Sent: Sunday, August 30, 2009 4:41 PM To: Repeater-Builder@yahoogroups.com Subject: Re: [Repeater-Builder] IFR 1600S I have a 1600S, have had it now for about 3 years. No trouble at all. I Love it.. The operators manual is available on the net in a PDF, however I got mine

[Repeater-Builder] IFR 1600S

I have a chance to acquire an IFR 1600S and would like some users reports on their experience relative to the instruments performance and reliability to help me make my decision! Are manuals available somewhere for these units other than from IFR?? Thanks for your help!! Lloyd VE3ERQ

Re: [Repeater-Builder] IFR 1600S

I have a 1600S, have had it now for about 3 years. No trouble at all. I Love it.. The operators manual is available on the net in a PDF, however I got mine from the company I purchased the Monitor from in printed form. It's several hundred pages. Gary - K7NEY shibukiau wrote: I have a

RE: [Repeater-Builder] IFR 1600S

-buil...@yahoogroups.com] De la part de shibukiau Envoyé : 30 août 2009 09:07 À : Repeater-Builder@yahoogroups.com Objet : [Repeater-Builder] IFR 1600S I have a chance to acquire an IFR 1600S and would like some users reports on their experience relative to the instruments performance

[Repeater-Builder] IFR 1600s

Hello Group Hope you'all may be able to help,my IFR 16006 is due for calibration but still passes all self test.The problem is in the trackin generator when tuning duplexer's it has three settings for the tracking gen, low, medium and high,I thought it was only susposed to just change the scan

Re: [Repeater-Builder] IFR 1600s

My 1900 has similar Tracking Generator Resolution. Low Resolution = Fastest Sweep - may pass over some stuff that would be displayed in HI RES that is a much slower sweep. I would expect some difference in the trace. Best success, Steve Bosshard NU5D Joel wrote: Hello Group Hope

[Repeater-Builder] IFR 1600S service monitors fs

Just want to pass along for those looking for a nice service monitor, TekNet has several IFR 1600S that were just taken out of service from a cellular phone manufacturer. These units do full cross band duplex, spectrum analyzer/tracking generator and built in scope/DMM/SINAD. These