Re: [Repeater-Builder] Micor Amp TLE1713A

2003-11-09 Thread Eric Lemmon
E1713A ?? > > - Original Message - > From: "Kevin Berlen" <[EMAIL PROTECTED]> > To: > Sent: Saturday, November 08, 2003 5:33 PM > Subject: Re: [Repeater-Builder] Micor Amp TLE1713A > > > Approximately 2 watts will drive this amp to full output. The

Re: [Repeater-Builder] Micor Amp TLE1713A

2003-11-09 Thread Kevin Berlen
What is the out put of the Micor TLE1713A ?? The amp is rated for 75 watts continous duty, once it passes thru the stations built in single stage circulator. They can be difficult and expensive to repair though, so most people run them at 50 to 60 watts output. On the bench, I have seen well ov

Re: [Repeater-Builder] Micor Amp TLE1713A

2003-11-09 Thread Joe Peterson
What is the out put of the Micor TLE1713A ?? - Original Message - From: "Kevin Berlen" <[EMAIL PROTECTED]> To: Sent: Saturday, November 08, 2003 5:33 PM Subject: Re: [Repeater-Builder] Micor Amp TLE1713A > Approximately 2 watts will drive this amp to full output. T

Re: [Repeater-Builder] Micor Amp TLE1713A

2003-11-08 Thread Kevin Berlen
Approximately 2 watts will drive this amp to full output. The yellow lead is the control voltage input. Good luck with your project and 73, Kevin, K9HX At 10:18 PM 11/8/2003 +, you wrote: >I plan on Using A Micor TLE1713A Amp temporally driving it with a >Maxtrac, What is the Max Wattage

[Repeater-Builder] Micor Amp TLE1713A

2003-11-08 Thread ka9qjg1
I plan on Using A Micor TLE1713A Amp temporally driving it with a Maxtrac, What is the Max Wattage input to this Amp for Full Output, I will be using the Micor Pwr supply so I will have the 9Volt control Voltage , Is this How You control the output of the amp RF Out ? Thanks Don KA9QJG