Hi Ralph,
Check out the yahoo group, "ecbarter:. I know the guy who started it ("DL").
People trade/swap electronics parts, wire, etc.
73, KD6AAJ
--- On Tue, 7/6/10, Ralph S. Turk wrote:
From: Ralph S. Turk
Subject: [Repeater-Builder] Proto boards
To: "Repeater-Bui
Try Nuts & Volts magazine, thy might have what you need. www.nutsvolts.com
From: Ralph S. Turk
To: Repeater-Builder
Sent: Tue, July 6, 2010 2:16:47 PM
Subject: [Repeater-Builder] Proto boards
Hi All
Looking for small etched, maybe drilled, small bo
Or:
http://www.wa5vjb.com/products4.html
6.5" by 4.25" Large Proto Board $5
3.75" by 2.75" Small Proto Board $3
Kent is also a source of economical built-to-spec preamps.
--
mailto:o...@ozindfw.net
Oz
POB 93167
Southlake, TX 76092 (Near DFW Airport)
Ralph
- Original Message -
From: "Jeff DePolo"
To: Repeater-Builder@yahoogroups.com
Sent: Tuesday, July 6, 2010 2:32:03 PM
Subject: RE: [Repeater-Builder] Proto boards
Vector Electronics (Google "vectorbord" and "circbord", not typos), GC
Electronics,
m
> [mailto:repeater-buil...@yahoogroups.com] On Behalf Of Ralph S. Turk
> Sent: Tuesday, July 06, 2010 3:17 PM
> To: Repeater-Builder
> Subject: [Repeater-Builder] Proto boards
>
>
>
> Hi All
> Looking for small etched, maybe drilled, small boards with layout for
&
At 12:16 PM 7/6/2010, Ralph S. Turk wrote:
>
>
>Hi All
>Looking for small etched, maybe drilled, small boards with layout for
>several transistors, resistors etc all isolated pads
>
>Also looking for ones that have layouts for 8pin, 14 pin or 16 pin dip with
>isolated pads for hook up
>
>I have som
Hi All
Looking for small etched, maybe drilled, small boards with layout for
several transistors, resistors etc all isolated pads
Also looking for ones that have layouts for 8pin, 14 pin or 16 pin dip with
isolated pads for hook up
I have some misc of the above and they are great for inverte
7 matches
Mail list logo
