Apparently on my rev of the 10v card, there is another mod that must be made. The problem was A6, which on later Rev 10 volt cards includes a jumper, H16/H17 which needs to be cut to stop the rx mute. Thanks to The 'Mastr' Index of GE LBIs!!!
-Terry --- In Repeater-Builder@yahoogroups.com, "nq4y" <[EMAIL PROTECTED]> wrote: > > > I have a GE Mastr II repeater that mutes the receiver when the PTT > is activated. I have checked the jumpers listed in the station to > repeater conversion information: > http://www.repeater-builder.com/ge/mastrIIstationmod.html > > The 10v regulator card has jumpers from 1 to 2 and 1 to 3. > > The jumpers on the system board are not present: > H41 to H42 > H68 to H69 > H72 to H73 > > The following jumpers are present: > H47 to H48 > J933 pin 4 to pin 8 > > I have checked the voltage on the P904 Pin 7 indeed goes to ground > in transmit. PL19D1472G2G1 is listed on the drawer. > > Any ideas what other things I need to check to enable RX when the > PTT is active? > > Thanks > > Terry NQ4Y Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/