Thanks for your suggestion. That is basically what I ended up doing. I programmed the unit as full duplex remote base, which basically bypasses the internal controller. I think the only thing I might add is a timer circuit for hang time. Right now the PTT drops as soon as the COR drops out.
Thanks again everyone for all your help. John Liguori Sparta, NJ --- In Repeater-Builder@yahoogroups.com, "Milt" <[EMAIL PROTECTED]> wrote: > > John, > > General setup, I'm not directly familure with this unit. > > The Icom needs to operate as a full duplex base radio instead of as a > repeater. The internal controller will most likely not be used, unless it > can provide an ID function. This might be done via programming or a switch > (Rpt/Local). > > Bring the audio and COS from the Icom receiver to the Doug Hall voter. Take > the audio output of the voter and PTT and feed to the Icom transmitter. > > Good Luck > > Milton Engle > N3LTQ > M&D Technical Services, LLC > > > > ----- Original Message ----- > From: "John" <99-1nwecs.org2@> > To: <Repeater-Builder@yahoogroups.com> > Sent: Tuesday, March 11, 2008 4:27 PM > Subject: [Repeater-Builder] ICOM FR-3000 / FR-4000 repeater > > > >I have an Icom FR-3000 repeater in use. I would like to add a Doug Hall > > signal to noise voter. I am not sure how to interface the voter into > > the repeater. I have COR and audio coming from my other receivers into > > the voter. My question is how to break out the receiver from the > > repeater, send it out to the voter, and send the voted signal back into > > the repeater activating the repeater controller & transmitter? Can this > > be done using the internal repeater controller of the Icom? Should I > > use an external controller? I have the Icom instruction manual. It > > gives some pin-out information but doesn't seem to have what I am > > looking for. Is there a detailed service manual for these? Does someone > > have a copy they can send me? I tried contacting Icom but the systems > > people were not available to offer any assistance. > > > > Thanks in advance, > > John Liguori > > Sparta Twp NJ > > > > > > > > > > > > > > Yahoo! Groups Links > > > > > > >