--- In Repeater-Builder@yahoogroups.com, "WB8UJB" <[EMAIL PROTECTED]> wrote: "I just got our new Spectrum S-7r FM repeater. I sent the Micro Computer Concepts RC-1000v controller to them to hook up. The PL board installed is the Communications Specialists TS-64. Spectrum hooked the TS-64 up with a toggle switch grounding the PTT and Hangup lines to put it in PL mode. ... We need to be able to control this function from the field. ... I am not able to make the controller turn off the TS-64 to allow for carrier access to the repeater. It works fine with PL access...." __________________________________________________ _______________________
The RC-1000V has three AUX output control lines. These can be remotely controlled based on the controller programming. You can connect one of these to the TS-64 to allow you to turn PL encode on and off as desired. If the PL decoder output is correctly connected to the RC-1000V input - you should be able to switch between carrier access and PL access with a single *XX code as described in the RC-1000V user manual - section 3.6 "PL Override" If that doesn't work, check the connection from the TS-64 output to the RC-1000V RX COS input at P1-4. Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Repeater-Builder/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/