Hi Skipp, Yes I reread the post and realize I jumped to some horrible
conclusion. My bad. Guess I'll sink back into my cave and think
twice before commenting.
Randy
--- In Repeater-Builder@yahoogroups.com, skipp025 skipp...@...
wrote:
Hi Randy,
I did place a notch cavity in the
I remember that Neutec Unit... saw it on Ebay.
Mike
Do you have any analog television stations on channel(s) 11
through 14 in the area still on the air?
If so, I might suspect an IF image might be possible. I had
the same type of problem here from channel 13 getting into a
number of Icom
Hi Possib. a high power C.B. operater.
- Original Message -
From: skipp025
To: Repeater-Builder@yahoogroups.com
Sent: Thursday, February 26, 2009 9:51 AM
Subject: [Repeater-Builder] Re: Interference or Intermod ( ? ) Helphere
goes
I remember that Neutec Unit... saw
Skipp, why would you not filter it on the input?
Randy
--- In Repeater-Builder@yahoogroups.com, skipp025 skipp...@...
wrote:
I remember that Neutec Unit... saw it on Ebay.
Mike
Do you have any analog television stations on channel(s) 11
through 14 in the area still on the air?
] On Behalf Of james f potter
Sent: Thursday, February 26, 2009 11:41 AM
To: Repeater-Builder@yahoogroups.com
Subject: Re: [Repeater-Builder] Re: Interference or Intermod ( ? )
Helphere goes
Hi Possib. a high power C.B. operater.
- Original Message -
From: skipp025 mailto:skipp
[mailto:repeater-buil...@yahoogroups.com] On Behalf Of james f potter
Sent: Thursday, February 26, 2009 11:41 AM
To: Repeater-Builder@yahoogroups.com
Subject: Re: [Repeater-Builder] Re: Interference or Intermod ( ? )
Helphere goes
Hi Possib. a high power C.B. operater.
- Original
:58 PM
To: Repeater-Builder@yahoogroups.com
Subject: RE: [Repeater-Builder] Re: Interference or Intermod ( ? )
Helphere goes
Don't analog TV receivers us an IF of 45 MHz?
About 15 years ago I lived in an apartment where I had a 29.6 Mhz Mocom 70
remote base and a LPB series 330watt Motrac
Hi Randy,
I did place a notch cavity in the antenna feed line, tuned
to the image frequency of the receiver IF.
As an example
Notch 245.750MHz (TV Channel 14 Audio Carrier Frequency)
245.750MHz minus 21.4 IF = 224.05
Receiver IF Frequencies vary a bit... and both Channel
13 and 14
...@yahoogroups.com] On Behalf Of JOHN MACKEY
Sent: Thursday, February 26, 2009 5:58 PM
To: Repeater-Builder@yahoogroups.com
Subject: RE: [Repeater-Builder] Re: Interference or Intermod ( ? )
Helphere goes
Don't analog TV receivers us an IF of 45 MHz?
About 15 years ago I lived
AM
To: Repeater-Builder@yahoogroups.com
Subject: [Repeater-Builder] Re: Interference or Intermod ( ? ) Helphere
goes
Try a meet and greet first...
You could offer to help the CB radio guy clean up his station
and coax him toward getting a ham ticket. He might not even
know he's hosing
That's not right, TV channel 14 is 470-476 Mhz.
-- Original Message --
Received: Thu, 26 Feb 2009 08:59:28 PM PST
From: skipp025 skipp...@yahoo.com
To: Repeater-Builder@yahoogroups.com
Subject: [Repeater-Builder] Re: Interference or Intermod ( ? ) Helphere
goes
Hi Randy,
I
-Builder@yahoogroups.com
Subject: [Repeater-Builder] Re: Interference or Intermod ( ? )
Helphere
goes
Hi Randy,
I did place a notch cavity in the antenna feed line, tuned
to the image frequency of the receiver IF.
As an example
Notch 245.750MHz (TV Channel 14 Audio Carrier
12 matches
Mail list logo