At 12:07 AM 11/23/2005 -, you wrote:
>
>The performance of the circulator on the test
>equipment is not a real world test. In operation
>the circulator will heat up and change value
>quite a bit. Much of operating a circulator is
>about heat management.
<---Yep. Just wait until all that
The performance of the circulator on the test
equipment is not a real world test. In operation
the circulator will heat up and change value
quite a bit. Much of operating a circulator is
about heat management.
cheers,
skipp
> "Bob M." <[EMAIL PROTECTED]> wrote:
>
> I looked at the duple
At 11/22/2005 10:46 AM, you wrote:
> > [EMAIL PROTECTED] wrote:
>
> > I once had an Exec II RFPA that didn't "like" the
> > duplexer load it was TXing into.
>
>The duplexer shouldn't be the load...
I should have left the word "load" out. Technically the "load" was the
duplexer followed by a 50 o
At 06:41 PM 11/22/2005 -, you wrote:
>Because all that unmatched "stray rf" is very often
>looking for some place betta' (or worse) to go.
>
> though I wouldn't qualify it as a fix for desense.
<---That's my point. The symptoms (and causes) of intermod are not the same
as the symptoms
> [EMAIL PROTECTED] wrote:
> I once had an Exec II RFPA that didn't "like" the
> duplexer load it was TXing into.
The duplexer shouldn't be the load...
> Had massive desense unless there was a circulator
> between the TX & duplexer.
Would have been better to provide a proper 50
system thr
Because all that unmatched "stray rf" is very often
looking for some place betta' (or worse) to go.
though I wouldn't qualify it as a fix for desense.
cheers,
skipp
> Ken Arck <[EMAIL PROTECTED]> wrote:
>
> At 06:00 AM 11/22/2005 -0800, you wrote:
>
> >I'd like to try a circulator befo
6 matches
Mail list logo