> "N9WYS" <[EMAIL PROTECTED]> wrote:
> Gary, Skipp and/or anyone else,
> I'm just curious - where is the failure occurring in
> your PA?
Depends on which model/version you have...
Most PA failures occur in the final transistor
module section. (The expensive parts) The cause
is heat, possi
lling to scrounge up an old
UHF
> Motorola Mitrek and cannibalize it to get rid of the headaches I'm
suffering
> now.
>
> -Original Message-
> From: Gary [mailto:[EMAIL PROTECTED]
> Sent: Monday, January 03, 2005 7:55 PM
> To: Repeater-Builder@yahoogrou
Motorola Mitrek and cannibalize it to get rid of the headaches I'm suffering
now.
-Original Message-
From: Gary [mailto:[EMAIL PROTECTED]
Sent: Monday, January 03, 2005 7:55 PM
To: Repeater-Builder@yahoogroups.com
Subject: [Repeater-Builder] Re: MSR2000 PA Problems
---
--- In Repeater-Builder@yahoogroups.com, "skipp025" <[EMAIL PROTECTED]>
wrote:
>
> > "Gary" <[EMAIL PROTECTED]> wrote:
> > About a year and a half ago I replaced the whole board
> > on my VHF MSR2000 110 watt NCD PA. (My PA had more
> > problems than just the transistors) I used the PA board
> "Gary" <[EMAIL PROTECTED]> wrote:
> About a year and a half ago I replaced the whole board
> on my VHF MSR2000 110 watt NCD PA. (My PA had more
> problems than just the transistors) I used the PA board
> out of a 110 watt mitrek mobile.
Tis' the cost effective way if you have the skills,
p
5 matches
Mail list logo
