[Repeater-Builder] Re: Manual for HAL ID-1000?

I submitted to Repeater Builders (WA6ILQ) the Programming Section (IV.) of the HAL ID-1A REPEATER IDENTIFIER Manual. This section describes how to properly solder the diodes (1N270) in the DASH Matrix and SPACE Matrix of the ID-1A for the creation of a CW message (Repeater ID). This section of

[Repeater-Builder] Re: Manual for HAL ID-1000?

HAL's number is 217-367-7373. Great folks to deal with. Al, K9SI

[Repeater-Builder] Re: Manual for HAL ID-1000?

I will send those specific pages -- How to program Diode matrix and schematic diagram for the HAL ID-1A to Repeater Builders for posting (access), The FULL manual is still available for HAL Communications, Urbana, IL greg w9gb

[Repeater-Builder] Re: Manual for HAL ID-1000?

Chris - I have 2 of the HAL ID-1A units that I picked up surplus from a Western NY utility company last year. They used these 2 units on their older repeater systems (circa 1970s) -- and one unit -- was converted fro 120 VAC to 12 VDC. YES, they are diode matrix programmed (for ID) -- which was

[Repeater-Builder] Re: Manual for Hamtronics (actually VHF Engineering) kit RX & TX

Re: Manual for Hamtronics (actually VHF Engineering) kit RX & TX The picture depicts a VHF Engineering Transmitter and Receiver Setup. VHF Engineering Transmitters properly aligned are still quite usable. As you have probably noticed it and the receiver are both crystal controlled. Their

[Repeater-Builder] Re: Manual needed for Spectrum Communications SCR 1000A repeater

Email me direct Darryl, I've probably got the manual information in pdf form I could Email you. cheers, skipp skipp025 at yahoo.com > "dvickn4ome" wrote: > > I'm looking for a manual for the Spectrum Communications SCR 1000A VHF > repeater or any other information anyone can share. I nee

[Repeater-Builder] Re: manual needed

Hi all, Does anybody have a spare hard copy manual for a MOT VHF MCS2000 that they would sell ? Thanks in advance, Mike KB5FLX m.dietr...@peoplepc.com

[Repeater-Builder] Re: Manual Request-Motorola RICK

--- In Repeater-Builder@yahoogroups.com, "Joe Serocki" wrote: " Anyone have a manual? ..." - ebay 10 bucks 350158994897

[Repeater-Builder] Re: manual needed

Hi ALL, Does anybody have an extra hard copy manual for a Uniden MRS 804 800 mhz repeater they would sell. Can contct off list at m.dietr...@peoplepc.com Thanks, Mike KB5FLX

RE: [Repeater-Builder] Re: Manual needed Motorola S-1320A Signal Generator

@yahoogroups.com Subject: [Repeater-Builder] Re: Manual needed Motorola S-1320A Signal Generator This link does not appear to be working! --- In Repeater-Builder@yahoogroups.com <mailto:Repeater-Builder%40yahoogroups.com> , Don Kovalchik - W8DPK wrote: > > Here is a link to the S-1320A se

[Repeater-Builder] Re: Manual needed Motorola S-1320A Signal Generator

This link does not appear to be working! --- In Repeater-Builder@yahoogroups.com, Don Kovalchik - W8DPK wrote: > > Here is a link to the S-1320A service manual: > > > > It's a pretty large file, about 16MB, but it's very high resoluti

[Repeater-Builder] Re: Manual

uilder@yahoogroups.com > [mailto:[EMAIL PROTECTED] On Behalf Of Randy > Sent: Saturday, December 29, 2007 9:24 AM > To: Repeater-Builder@yahoogroups.com > Subject: [Repeater-Builder] Re: Manual > > According to another source, the LBI-4100 is not the one I need, but &g

RE: [Repeater-Builder] Re: Manual

73, Eric Lemmon WB6FLY -Original Message- From: Repeater-Builder@yahoogroups.com [mailto:[EMAIL PROTECTED] On Behalf Of Randy Sent: Saturday, December 29, 2007 9:24 AM To: Repeater-Builder@yahoogroups.com Subject: [Repeater-Builder] Re: Manual According to another source, the LBI-4100 i

[Repeater-Builder] Re: Manual

According to another source, the LBI-4100 is not the one I need, but the LBI-4938C is. . . . In Repeater-Builder@yahoogroups.com, "Randy" <[EMAIL PROTECTED]> wrote: > > Anyone know where I can obtain the > manual for GE LBI #4100 ? > It is not found in: The 'Mastr' > Index of GE LBI's >

[Repeater-Builder] Re: Manual for MSR2000

--- In Repeater-Builder@yahoogroups.com, Paul Guello <[EMAIL PROTECTED]> wrote: > > Anyone out there in repeater land have a manual they could spare or share for a MSR2000? Or know where one is available? > > Paul, kb9wlc > What band? I have some VHF MSR-2000 manuals. Contact me off-line if

Re: [Repeater-Builder] Re: Manual for MSR2000

Ok, that narrows it down a bit. Neil - WA6KLA n9wys wrote: > > I'm also looking for the receiver section of the manual for a UHF > MSR2000. I'm willing to pay for postage, copying, etc. > > Mark - N9WYS > > --- In Repeater-Builder@yahoogroups.com, Neil McKie <[EMAIL PROTECTED]> > wrote

[Repeater-Builder] Re: Manual for MSR2000

I'm also looking for the receiver section of the manual for a UHF MSR2000. I'm willing to pay for postage, copying, etc. Mark - N9WYS --- In Repeater-Builder@yahoogroups.com, Neil McKie <[EMAIL PROTECTED]> wrote: > > Please remember ... there are two (2) manuals ... one for the RF > secti