At 02:12 PM 1/26/2005 -0500, you wrote:
>Ken, speaking of the Kenwood remote bases, do you manufacture a board,
>or a kit for the remote base interface for the G707's etc? If so, how much.
Ken, speaking of the Kenwood remote bases, do you manufacture a board,
or a kit for the remote base interface for the G707's etc? If so, how much.
Also, has any consideration been made of developing a USB port
programming solution? My laptop does not have a serial port! :-( Mike
Ken Arck wrot
Thank you. The RBI-1 drawing was very difficult to read but I was
looking at the same thing. Your detail confirms this. Thank you for
clearing up what the RBI-1 drawing really said.
--- In Repeater-Builder@yahoogroups.com, Sean Fitzharris <[EMAIL PROTECTED]>
wrote:
>
> Here's the data I extr
Here's the data I extracted from the two manuals. I just had a friend
(NT6S) verify this pinout with a factory PG-4H.
73,
Sean W6MOW
RBI-1 RJ-45 Kenwood 8 PIN
---
7 - TXA_KW 1 - MIC AUDIO
5 - PTT_KW 2 - PTT
4 - DOWN_KW 3 - DWN
1 - UP_KW 4 - UP
3
At 02:31 AM 1/25/2005 -, you wrote:
>I know but I have all of the parts here ready to solder and the radios
>are built into such a cool rack mount panel. I really want the cables
>to be an exact length and dressed so nicely. Besides with the correct
>pinout I could be done in an hour instead
I know but I have all of the parts here ready to solder and the radios
are built into such a cool rack mount panel. I really want the cables
to be an exact length and dressed so nicely. Besides with the correct
pinout I could be done in an hour instead of waiting weeks for the
shippment.
Jeff
-
6 matches
Mail list logo