happens once in a while.
Just wanting to cover my bases!
I appreciate any advice.
Bruce
- Original Message -
From: Mike WA6ILQ [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Tuesday, November 30, 2004 5:20 AM
Subject: Re: [Repeater-Builder] need input on changing Mitrek
Usually if the covers are in place, that won't be a problem
(the Mitreks are built in a pretty tight housing) but if it is,
then the solution is in my Mitrek Interfacing writeup - just
bump one to the alternate 10.8mhz IF (but he will have to
re-order the RX rock, or tell the rock-chippers when
advice.
I'm sure that the list members will contribute.
Bruce
Mike WA6ILQ
- Original Message -
From: Mike WA6ILQ [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Tuesday, November 30, 2004 5:20 AM
Subject: Re: [Repeater-Builder] need input on changing Mitrek oscillator
crystal
I have read a few comments in the past about the need for changing
the crystal from one side of the operating frequency to the other in
a Mitrek.
I am not sure I will be wording this properly so please be patient.
I will have two repeaters at the same site which are Mitrek
conversions.
One
4 matches
Mail list logo
