Re: [Repeater-Builder] Mastr II drift problem

Mike wrote: >It's on the page that I've posted the link to three times hoping >that Steve would look at it. >See this article >Read the whole thing, and look for the paragraph that >starts "There is one way to cheat" Thank you. I scanned all the

Re: [Repeater-Builder] Mastr II drift problem

It's on the page that I've posted the link to three times hoping that Steve would look at it. See this article Read the whole thing, and look for the paragraph that starts "There is one way to cheat" Mike WA6ILQ At 09:38 PM 08/07/10, you wrote:

Re: [Repeater-Builder] Mastr II drift problem

>modified the plug that goes in to the exciter by putting >two resistors and a jumper on the plug to enable the >compensate line. Gerald, AA4YQ told me about this. Could you please pass along the details of this mod, or point to a link online? Thanks... Steve sbjohns...@aol.com http://www.wd8d

Re: [Repeater-Builder] Mastr II drift problem

At 03:33 PM 08/03/10, you wrote: >Hello all, > >I have having a severe drift problem on my GE Mastr II 2 meter >repeater. The transmit freq will drift nearly 2 KHZ over a 5-10 >minute period. I have changed exciters and used a different ICOM but >no improvement. The building that I am in is not

RE: [Repeater-Builder] Mastr II drift problem

Did you just buy the crystals and insert them in the ICOMs or did you send them in to the crystal MFG to be compensated. If you did them yourself the compensation is probably now messed up. The best way to fix it is to send them in to the crystal MFG for compensation. Stan From: Repeater-Bu

RE: [Repeater-Builder] Mastr II drift problem

Only if your crystals in the ICOMs are from BOMAR. David From: Repeater-Builder@yahoogroups.com [mailto:repeater-buil...@yahoogroups.com] On Behalf Of steve Sent: Tuesday, August 03, 2010 5:33 PM To: Repeater-Builder@yahoogroups.com Subject: [Repeater-Builder] Mastr II drift problem