epeater-Builder@yahoogroups.com
>Subject: Re: [Repeater-Builder] Mitrek/Micor Station test.
>
>There are some part numbers on the Test Set page atwww.repeater-builder.com
>
>But you will probably find it easier and cheaper to buy a Micor stationtest
>set
>(
There are some part numbers on the Test Set page at www.repeater-builder.com
But you will probably find it easier and cheaper to buy a Micor
station test set
(the one made to mount inside a Micor station cabinet) and rewire it to do
Micors and Mitreks.
The male connector that is used on Motrac
Ralph,
You're in luck! Motorola Parts still has that unique 12-pin male plug in
stock, for about $17. Not only was that plug used for MSY and Mitrek test
cables, but it also is used for a whole slew of program/test cables for
handhelds, such as the SP-50, HT1000, Saber, and others. Since some o
> Also could use the 5 Pin male connector used for Micors.
You mean 7 pin?
The easiest place to find those is in a SpectraTAC receiver chassis - there
is a little jumper with one of those connectors on each end that connects
the receiver to the interconnect board for use with the metering module.
4 matches
Mail list logo