I've done things like this before. (dual power supplies) As long as I tied
the negative leads together I never had a problem.
-- Original Message --
Received: Mon, 24 Jan 2005 05:09:02 PM CST
From: "dekk5fm" <[EMAIL PROTECTED]>
To: Repeater-Builder@yahoogroups.com
Subject: [Repeater-Buil
At 11:00 PM 1/24/2005 -, you wrote:
>While building out my repeater empire, I discovered that an Astron RM-
>35 does not like providing 30 amps continuous :) So, I thought I
>would run the latest repeater on a separate power supply. However,
>the controller, an Arcom RC-210, would not recog
On Mon, 24 Jan 2005, Mathew Quaife wrote:
> Sounds like a ground issue. Your Astron 35 amp power supply is actually
> 26 amps normal, 35 amps surge. How much power are you running? Some of
> the other techs can correct me if I am wrong, but to tie them together
> you have to use some diodes
You can keep your loads seperated and just tie the ground side (negative
terminals)
of both power supplies together. This should take care of the problem.
Connecting
the power supplies in parallel to increase the current capacity can be
troublesome
at best. Good luck and 73,
Kevin, K9HX
At 06
Sounds like a ground issue. Your Astron 35 amp power supply is actually 26
amps normal, 35 amps surge. How much power are you running? Some of the
other techs can correct me if I am wrong, but to tie them together you have
to use some diodes to prevent one from feeding back into the other. The
5 matches
Mail list logo