Re: [Repeater-Builder] Motorola GTX900 Programming Issue

2007-01-24 Thread Bob M.
As he stated later on, his cable worked with a MaxTrac and a GM300. Both of these are mobiles, so I think it's safe to assume that his GTX is a mobile as well as they all use the same RJ45 programming cable. Bob M. == --- Danny Musten <[EMAIL PROTECTED]> wrote: > Mobile or Portable? The port

Re: [Repeater-Builder] Motorola GTX900 Programming Issue

2007-01-24 Thread Bob M.
I would expect that even an older version would still read the radio and just come up with a "model not found" error if it was too old. Did this radio EVER get programmed properly at your house? The programming line doesn't go too far into the radio. You could try grounding the programming line,

Re: [Repeater-Builder] Motorola GTX900 Programming Issue

2007-01-24 Thread Danny Musten
Mobile or Portable? The portable needs to be powered, if so. More than likely it has been programmed with a newer RSS as Mike said. Danny KD4RAA On 1/24/07, Mike Perryman <[EMAIL PROTECTED]> wrote: > Sounds like someone may have used a newer version of RSS than yours > they are not backw

RE: [Repeater-Builder] Motorola GTX900 Programming Issue

2007-01-24 Thread Mike Perryman
One other thought... I am using this version.. no issues here. Software Version... R04.00.01 Software Date.. 06-OCT-00 73 Mike Perryman www.k5jmp.us -Original Message- From: Repeater-Builder@yahoogroups.com [mailto:[EMAIL PROTECTED] Behalf Of Andrew

RE: [Repeater-Builder] Motorola GTX900 Programming Issue

2007-01-24 Thread Mike Perryman
Sounds like someone may have used a newer version of RSS than yours they are not backward compatible... That is the only guess I would have... 73 Mike Perryman www.k5jmp.us -Original Message- From: Repeater-Builder@yahoogroups.com [mailto:[EMAIL PROTECTED] Behalf Of Andrew G. S