At 9/5/2008 22:26, you wrote:
Heck, While we re piling on, I had a Pinto oncedamned thing smoked all
the time, finally caught fire. COOOL. -M
Funny, I never heard of a Pinto repeater.
;)
Bob NO6B
At 9/5/2008 22:53, you wrote:
We are putting up three new repeaters. I just got Hipro's new catalog and
I see Arcom is listed in what looks like a favored status. Since we have
limited funds, I would like to know if there are problems with it or is it
just a fluke? If so we can look at other
http://geo.yahoo.com/serv?s=97359714/grpId=104168/grpspId=1705063108/msgId=85144/stime=1220664258/nc1=1/nc2=2/nc3=3
Thanks to everyone for their suggestions. I have the controller up and running
now, thanks to the DTMF encoder built into the RCP software. The
Repeater-Builders Friend will
On Sep 6, 2008, at 6:40 AM, georgiaskywarn wrote:
Good Suggestion Shanon! I have actually needed those chips from time
to time (thanks!)
They're still available, made by a number of companies. BG Micro used
to stock the California Microdevices copy of the chip.
--
Nate Duehr, WY0X
[EMAIL
lenaw12 wrote:
Eric..
Your response is out of line and indicates your either inability to
understand the original post or the technical needs of the situation.
Clearly, at this point, this is an interface issue between two
different manufacturer's products. In no way does he complain
Use a resistor and cap to inject bias on the mic line.
Robert...
--- In Repeater-Builder@yahoogroups.com, Mike Morris WA6ILQ
[EMAIL PROTECTED] wrote:
At 10:47 AM 09/03/08, you wrote:
I am constructing one of the repeater-builders friends', and am in
need of a DTMF pad, or suggestions. I
.
I'll get back to you as soon as and IF I find out. - Mike
From: Repeater-Builder@yahoogroups.com
[mailto:[EMAIL PROTECTED] On Behalf Of wd8chl
Sent: Saturday, September 06, 2008 3:56 AM
To: Repeater-Builder@yahoogroups.com
Subject: Re: [Repeater-Builder] Re: Looking for DTMF encoder
Eric
I really don't desire to get into a pissing contest with you over an
issue that was settled literally YEARS ago but if you insist, I would
be more than happy to once more post the entire exchange that took
place back then. You didn't exactly come out smelling like a rose as
you may
At 9/5/2008 12:29, you wrote:
Eric..
Your response is out of line and indicates your either inability to
understand the original post or the technical needs of the situation.
How is one stating his personal experience with/opinions on a specific
model of repeater-related equipment out of line?
: [Repeater-Builder] Re: Looking for DTMF encoder...or suggestions
Other than being off-topic for the topic (but not this list), I
disagree. Personally, I'd like to know exactly what Eric doesn't
like about the RC-210. I've owned one myself didn't care for it
either, but obviously many others
We are putting up three new repeaters. I just got Hipro's new catalog
and I see Arcom is listed in what looks like a favored status. Since we
have limited funds, I would like to know if there are problems with it
or is it just a fluke? If so we can look at other controllers. I would
appreciate
The original project used the style keypad that was meant to add DTMF
to handhelds back in the day, I came across someone that had a bunch
at a ham fest for $5 a pop. Check your or your friends junk box for
and dead HTs from the late 70s and 80s for a keypad unit that
detaches.
A quick ebay
That appears to be old phone pad. Probably will work ok. You will need
to figure out where and how to interface.
73
Dave
DCFluX wrote:
The original project used the style keypad that was meant to add DTMF
to handhelds back in the day, I came across someone that had a bunch
at a ham fest
skipp025 wrote:
All Motorola mics are 'pre-amped' mics.
Not accurate...
[paste text]
http://www.merriam-webster.com/dictionary/accurate
Main Entry: ac·cu·rate Listen to the pronunciation of accurate
Pronunciation: \#712;a-ky#601;-r#601;t, #712;a-k(#601;-)r#601;t\
Function:
- Original Message -
From: wd8chl [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Thursday, September 04, 2008 9:55 PM
Subject: Re: [Repeater-Builder] Re: Looking for DTMF encoder...or
suggestions
[snip]
Well, I was leaving out the old carbon mics...
;c}
I've got
15 matches
Mail list logo
