No Fuse on the RF IN/OUT so if you have a problem there you may have an open rf load it is behind that “N” connector in an RF shielded can it is a feed thru 50 ohm load. You can order them from Motorola I don’t have the part number anymore (nor do I have the 2600 any more :-( I sure miss my r-2600 best monitor I have ever used) you can also order them from mouser or dikey but seem like you have to order 100 or more and it seem that they got well over $1.00 each for them. I have put a cut off piece of resistor lead or the like in there before to finish a job but if you do that and then pump 5 watts plus in to the gen port or the antenna port then you have got big problems.
Gary _____ From: Repeater-Builder@yahoogroups.com [mailto:[EMAIL PROTECTED] On Behalf Of w4wsm Sent: Tuesday, February 06, 2007 2:39 PM To: Repeater-Builder@yahoogroups.com Subject: [Repeater-Builder] Re: Low sens on a 2600 monitor Checked and it looks like the ANT and GEN are both open. How do you get to the RF/IN OUT N connector fuse? Don't want to mess something up...last time it worked I was watching a guy that lived behind me on 27MHz...no telling what he was running and he must have not been good for my fuses! Oh and where can I find these things anyway? Thanks, Ben --- In HYPERLINK "mailto:Repeater-Builder%40yahoogroups.com"[EMAIL PROTECTED] m, "Gary LaForce" <[EMAIL PROTECTED]> wrote: > > There are fuses behind the antenna port and the gen port on the monitor they > are 1/16 of an amp pico fuses. Check them and see if there open. A good > fuse will not read zero ohms on a ohm meter I normally see around 4-5 ohms a > crossed a good fuse with a simpson 260. > > > > BTW the BNC connector will use screw out of the face of the monitor fuse is > inside of the connecter. > > > > Gary > > > > _____ > > From: HYPERLINK "mailto:Repeater-Builder%40yahoogroups.com"[EMAIL PROTECTED] m > [mailto:HYPERLINK "mailto:Repeater-Builder%40yahoogroups.com"[EMAIL PROTECTED] m] On Behalf Of w4wsm > Sent: Tuesday, February 06, 2007 8:02 AM > To: HYPERLINK "mailto:Repeater-Builder%40yahoogroups.com"[EMAIL PROTECTED] m > Subject: [Repeater-Builder] Low sens on a 2600 monitor > > > > Well just found this group so here is another question...last for now > I promise:-) > My 2600 service monitor has lost a lot of it's hearing. Is still 100% > on everything else but it has lost a lot sens. It was just one of > those turn it on and what happened type of thing. > > Any ideas on this one? > > Thanks! > Ben > > > > > -- > No virus found in this incoming message. > Checked by AVG Free Edition. > Version: 7.1.411 / Virus Database: 268.17.28/672 - Release Date: 02/06/2007 > > > > -- > No virus found in this outgoing message. > Checked by AVG Free Edition. > Version: 7.1.411 / Virus Database: 268.17.28/672 - Release Date: 02/06/2007 > -- No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.1.411 / Virus Database: 268.17.29/673 - Release Date: 02/06/2007 -- No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.1.411 / Virus Database: 268.17.29/673 - Release Date: 02/06/2007