RE: [Repeater-Builder] db 4062 duplexer

Rheolube 362, a conductive lubricant. 73, Eric Lemmon WB6FLY -Original Message- From: Repeater-Builder@yahoogroups.com [mailto:repeater-buil...@yahoogroups.com] On Behalf Of Joel Sent: Thursday, February 19, 2009 2:30 PM To: Repeater-Builder@yahoogroups.com Subject: [Repeater-Builder] d

Re: [Repeater-Builder] DB 4062 Duplexer

At 09:39 AM 08/06/09, you wrote: >Has anyone replaced the jumpers on a DB 4062 >duplexer with Andrews ¼ inch hardline? > >David Epley, N9CZV >Randolph County Emergency Coordinator >4866N 400E >Winchester, Indiana 47394 >Cell765.546.2592 >n9...@arrl.net

Re: [Repeater-Builder] db-4062 duplexer

Did you get an answer to this? I've forgotten what the A, B and C ranges were. I have a DB4062 which is 143 - 156 MHz. I can measure the cable length next time I am at the site (should be within a few days). I'm not sure the loops would be any different between the ranges, but they might..

Re: [Repeater-Builder] db-4062 duplexer

KA9FER DB4062 duplexer to change band segments.  I have loop information you need to modify or replace the loops.  Its a little complicated (for me anyway). If you give me a FAX number or snail mail info I can send the information to you. It won't look pretty or clear because is will be a

Re: [Repeater-Builder] DB 4062 Duplexer repair

If they are piston trimmers, grab a ICOM for a GE MASTR-II, as long as it is not a low band version. This is a cheap and readily avalible source. But you may have to solder the trimmer in place as I don't think the outer ring on the capacitor is threaded. On 4/12/05, Tom Tishken KD4WOV(laptop