Re: [Replicant] Replicant Git not accessible

Hi, doak writes: > https://git.replicant.us/replicant is not accessible because of an expired > certificate and set HSTS, at least for Firefox *and* my Git installation on > Debian. > I have never heard of HSTS before, but it seems to be configured for it. > It should work now again. Cheers,

Re: [Replicant] Replicant 0003 Release Delay [was: Re: Fdroid 1.0.1 with privileged extension causes crashes]

of the community would be willing to help out as well! > > In Solidarity, > Kurtis > > Wolfgang Wiedmeyer: >> >> Kurtis Hanna writes: >> >>> I was told on the Replicant IRC that Wolfgang has a solution to this >>> problem and it will be fixed in th

Re: [Replicant] Fdroid 1.0.1 with privileged extension causes crashes

Kurtis Hanna writes: > I was told on the Replicant IRC that Wolfgang has a solution to this > problem and it will be fixed in the next Replicant release. I forgot who > told me that. Is that true Wolfgang? Yes, at least I hope so[1]. As Simon already wrote, the reason is likely due to aapt2 whic

Re: [Replicant] Voice/SMS on I9305?

Josh Branning writes: > On 20/10/17 22:08, Josh Branning wrote: >> On 20/10/17 19:06, Josh Branning wrote: >>> On 18/10/17 09:09, Josh Branning wrote: Hi, I just ordered a S3 I9305, and then found out that Replicant doesn't yet support voice or SMS for this model ... doh. > [.

Re: [Replicant] Which data is kept/lost during an update ?

Denis 'GNUtoo' Carikli writes: > On Sun, 15 Oct 2017 12:33:16 +0200 > Frédéric Fort wrote: > >> Hello, >> >> I'm finally going to update my i9300 from Replicant 4.2 to 6.0. >> However, I would like to know which data is kept and which is lost. >> The phone's USB connector being broken, transfer

Re: [Replicant] i9300: USB issue => No adb

Denis 'GNUtoo' Carikli writes: > On Fri, 22 Sep 2017 15:03:46 -0700 > jc_gargma wrote: > > [...] >> I then tested downgrading to >> android-tools-7.1.2_r27-1-x86_64.pkg.tar.xz from my pacman cache, and >> I was able to successfully adb sideload the Replicant 6.0.0002 system >> zip from recovery.

Re: [Replicant] Galaxy S3 not booting

Joonas Kylmälä writes: > Wolfgang Wiedmeyer: >> Indeed, this sounds strange. It would have been good to have UART to >> see what happens ;) > > I wish I would have had that. If you or someone else reading this have > time it would be very helpful to get instructions on

Re: [Replicant] kernel_samsung_smdk4412: enable /proc/last_kmsg

Hi, Joonas Kylmälä writes: > It would be beneficial to have /proc/last_kmsg enabled for the kernel > kernel_samsung_smdk4412. Users could then easily send their kernel logs > for developers to look at. I included a patch to do this. Tested on i9305. Thanks for the patch! It's nice to see you get

Re: [Replicant] Galaxy S3 not booting

Hi Joonas, Joonas Kylmälä writes: > I was playing with resistors on the usb port with the i9305 (galaxy s3) > device in order to get the UART serial console working. Then I gave up > and took the wires out and flashed replicant to the device. The device > would not boot. Then I installed twrp wit

Re: [Replicant] RepWifi new version v0.5 released

Hi Fil, Fil writes: > Hello everybody, > > I just released a new version of RepWifi, with additional features and > some restyling. > The updated APKs are available at the same old forum post: > https://redmine.replicant.us/boards/9/topics/14079 > > Source code is available at my repo hosted on

Re: [Replicant] git.replicant.us: Switch from Gitlab to cgit+Gitolite

Wolfgang Wiedmeyer writes: > [...] > So a new more lightweight and reliable solution was needed. cgit seemed > to be the best choice for the web interface. The only missing feature, > compared to the feature set that was used from Gitlab, is an aggregated > feed for a group of G

Re: [Replicant] git.replicant.us: Switch from Gitlab to cgit+Gitolite

Paul Kocialkowski writes: > Le mercredi 16 août 2017 à 15:06 +0300, Tiberiu a écrit : >> Hi again, >> >> On 13.08.2017 00:30, Tiberiu wrote: >> > Does the LineageOS mirror at the new Replicant git instance have >> > nonfree blobs? >> >> Do you have an answer? > > I haven't conducted an investig

Re: [Replicant] SAMSUNG GALAXY XCOVER 3

Alexis Sampaio Kokorelis writes: > Hi, Good evening Hi, > I would like to know if the device from Samsung model galaxy xcover 3 is > suported by your project, is a later waterproof model of the s3 generation. Unfortunately, its hardware is very different to the S3 and it's not supported. I d

Re: [Replicant] [PATCH v2] Fix "RepWifi connection not correctly reported to userspace apps" Issue #1792.

Fil writes: > Fil wrote: >> Wolfgang Wiedmeyer wrote: >> > >> > Wouldn't it be possible to e.g. read the property >> > dhcp.wlan0.gateway and check if it's empty or not? >> For sure, but I currently lack a way of doing it, without using

Re: [Replicant] [PATCH v2] Fix "RepWifi connection not correctly reported to userspace apps" Issue #1792.

Fil writes: > [...] > All the same, I make myself available to introduce the adaptation we > discussed of, including public IPs as valid ones for wlan0. > Though, it would be much better for me to avoid > "rewrite-rebuild-reflash-and-test", as it is a *VERY* onerous process of > developing, compa

Re: [Replicant] [PATCH v2] Fix "RepWifi connection not correctly reported to userspace apps" Issue #1792.

Fil writes: > Joonas Kylmälä wrote: > [...] >> I also thought about making a list of valid IP addresses, i.e., site >> local addresses + public ip addresses but how do we know what is public >> ip address? The java.net.InetAddress class didn't have any methods for >> that so implementing it in th

Re: [Replicant] [PATCH v2] Fix "RepWifi connection not correctly reported to userspace apps" Issue #1792.

Hi, see the corresponding issue[1] for my comments on the patch. I think the patch is a nice short and elegant solution for now. Fil writes: > Joonas Kylmälä wrote: >> I'm not talking about the method below the declarations, but instead >> about the code that is above the declarations: > > Yes,

Re: [Replicant] i9305: Add support for rt2500usb wifi devices

Hi, the size of your message was over the limit for the list. I manually approved it now and your patches should be available to the list. Joonas Kylmälä writes: > Hi, > > The attached patches for kernel_samsung_smdk4412 enable support for wifi > usb dongles that use RT2500USB chipset. Thanks

Re: [Replicant] Hardware/Physical and Software Security

Hi, TIM Safiqul Amin writes: > Hello everyone, > > I hope you are good. > > As we know, hardware/physical security is very important. By hardware > or physical security I mean things like removing the built-in > microphone(s), removing the camera, or, even the modem etc. > > And by software secur

[Replicant] git.replicant.us: Switch from Gitlab to cgit+Gitolite

Hi, some of you, who wanted to get Replicant's source code over the last months or maybe even the last two years, probably have noticed that the Git server is often not reachable or stops working in the middle of getting the source code. The reason always was that Gitlab requires a lot of resource

Re: [Replicant] Replicant Digest, Vol 225, Issue 1

n-free software running on the main CPU. Best regards, Wolfgang > > On 19 July 2017 22:15:50 GMT+03:00, Wolfgang Wiedmeyer > wrote: >> >>Allan Mwenda writes: >> >>> LineageOS is a suitable replacement to CyanogenMod in the post. It is >>basically the

Re: [Replicant] Replicant Digest, Vol 225, Issue 1

Allan Mwenda writes: > LineageOS is a suitable replacement to CyanogenMod in the post. It is > basically the community effort to keep Cyanogenmod "open source" after the > attempt to close it and monetize it to manufacturers as CyanogenOS. > The community CyanogenMod (not to be confused with C

Re: [Replicant] [PATCH v2] index: Replicant 6.0 0001 images release

Hi, Paul Kocialkowski writes: > Hey, > > Le samedi 17 juin 2017 à 23:14 +0200, Wolfgang Wiedmeyer a écrit : >> Signed-off-by: Wolfgang Wiedmeyer >> --- >> index.php | 2 +- >> 1 file changed, 1 insertion(+), 1 deletion(-) >> >> diff --git a/in

[Replicant] [PATCH v2] index: Replicant 6.0 0001 images release

Signed-off-by: Wolfgang Wiedmeyer --- index.php | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/index.php b/index.php index a99aef9..a273fd1 100644 --- a/index.php +++ b/index.php @@ -2,7 +2,7 @@ - Latest Replicant release: Replicant 4.2 0004, supporting up to 12

[Replicant] [PATCH] freedom-privacy-security-issues: Adapt the note about security issues with the webview

The link is changed to point to the Replicant 6.0 webview issue and Replicant 4.2 is deprecated security-wise. Signed-off-by: Wolfgang Wiedmeyer --- freedom-privacy-security-issues.php | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/freedom-privacy-security-issues.php b

Re: [Replicant] bluetooth dongle CSR8510

Hi, Michael Bohn writes: > Hi all > how could I use my CSR8510 bluetooth dongle on my samsung note 2 ( > replicant 6.0 ) Looks like this one needs the HCI USB driver. This driver is not enabled for the Note 2. Technoethical[1] and Olimex[2] mention that at least kernel version 3.11 is necessary.

Re: [Replicant] redmine.replicant.us down for maintenance on Thursday

Wolfgang Wiedmeyer writes: > Hi all, > > redmine.replicant.us will be down for maintenance between 8:30 AM and > 9:30 AM PST on Thursday, June 8th. The wiki, issue tracker and forum > won't be accessible during that time. The upgrade didn't take place yesterday

Re: [Replicant] [PATCH 3/5] freedom-privacy-security-issues: Adapt the note about security issues with the webview

Hi, Paul Kocialkowski writes: > Hi, > > Le jeudi 16 mars 2017 à 00:01 +0100, Wolfgang Wiedmeyer a écrit : >> Signed-off-by: Wolfgang Wiedmeyer > > Does this mean that the issue was fixed in 4.2 and is still there in 6.0? > That would be quite surprising! No, it&#x

[Replicant] redmine.replicant.us down for maintenance on Thursday

Hi all, redmine.replicant.us will be down for maintenance between 8:30 AM and 9:30 AM PST on Thursday, June 8th. The wiki, issue tracker and forum won't be accessible during that time. The downtime is necessary so OSUOSL can complete an upgrade of Redmine From the now over five year old 1.3.0 rel

Re: [Replicant] [PATCH] screencap: Add naive SSH backend implementation.

Denis 'GNUtoo' Carikli writes: > This implementation is not efficent as each command will spawn a > new ssh command, which has considerable overhead and latency. > > Example usage: > ./screencap.sh -h root@192.168.43.1 -f OUTPUT.PNG Thanks, applied! It would be good to document this functional

Re: [Replicant] [PATCH] fix repwifi connection not reported to userspace apps. fix reverse-tether connection not reported to userspace apps.

Hi, Fil writes: > Dear Replicant fellows, > > As reported on the tracker I've finished my work on issue #1792. > Here-below is my very first patch to replicant (hurray!!!). Thank you very much for working on this issue! It's great to see you dive into the core Android code after your great work

Re: [Replicant] Mentioning donations in release announcements

Hi, John Sullivan writes: > Hi all -- Congrats on the release! I suggest that release announcements > mention the opportunity to donate and encourage people to do so (at > .) Thanks for the hint, I missed that! I added a note now. >