Howdy,
I was working today on an 300 mhz IBM running Win 98. The system had
recently been installed with Retrospect 5.11 Workgroup Server. The
LAN was running through a standard 10Bt hub. and there were several
Macs and 2 PC's on the network including the server PC.
Retrospect launches fine,
Has any one had any luck using the VXA tool on a Mac? My version just
bombs with some cryptic error that it can't find the target. Doesn't
crash, but doesn't find the drive either though the drive is listed
in the window.
Todd
On 9/26/00, Geoff Rainville emailed about "VXA Mac Tool":
>The
Eric Ullman wrote:
>
> Jon Gardner <[EMAIL PROTECTED]> slyly asked:
>
> > So, hey, Dantz folks, when can we start
> > beta-testing Retrospect X?
>
> Well, since we're on 4.3 now, I think we should have Retrospect X (ten) by
> about Spring 2009. Please note that this schedule will slip as necess
Jon Gardner <[EMAIL PROTECTED]> slyly asked:
> So, hey, Dantz folks, when can we start
> beta-testing Retrospect X?
Well, since we're on 4.3 now, I think we should have Retrospect X (ten) by
about Spring 2009. Please note that this schedule will slip as necessary to
enforce reliability standards
Up until now I have been using the internal DVD-RAM in a G4/450 to backup a
couple of Mac servers. This morning I came in to find Retrospect asking for
another disc as the original was now full.
As a result I'm now looking for some new hardware that has the capacity to
take care of my backup r
on 9/26/00 12:43 PM, Geoff Rainville at [EMAIL PROTECTED] wrote:
> VXATool for MAC is a MAC based utility used to configure your VXA-1 tape
> drive. With VXATool, you can check and uplevel firmware, optimize the drive
> for speed or capacity, and toggle compression off or on.
Way cool, Geoff! He
One thing to look at:
In the TCP/IP Control panel, set to advanced mode (via the edit menu):
Click the options button and make sure that "load only when needed" is
unchecked for machines that you don't want to initiate network activity when
unnecessary. However, if a machine is on a network, I s
Once upon a 26-09-2000, Pam Lefkowitz hit keys in the following order:
> It sounds like you're backing up via static IP addresses but the clients
> are running on DHCP. Therefore, when they reboot they'll have a new IP
> address and Retrospect won't find them. You might want to check to make
>
>The problem appeared when the laptop's user took it to a foreign
>network and they changed something in the configuration. I've been
>attempting to locate what changed. I suspect the laptop is
>attempting to use NTP from the date and time control panel (however,
>this does not cause the dial
Call my account rep, Skip Heeman at CDW and tell him I sent you and he'll
sell you the VXA tapes for $67. Ask for CDW part# 204732.
Here's his contact info:
Skip Heeman
[EMAIL PROTECTED]
(877) 780-7017
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf
Of Ben
There was some talk on this list last week about the VXA Tool for Mac. It is
now live and posted on the ecrix.com site, in the support section.
VXATool for MAC is a MAC based utility used to configure your VXA-1 tape
drive. With VXATool, you can check and uplevel firmware, optimize the drive
for
At 10:43 -0400 9/18/00, Church Initiative WebMaster wrote:
> > Also, in Graham's chart, the VXA V-17 media (33 gig native) is listed
>> at $67. Anyone know where I can find it at this price? The best
>> that I've found so far is ~72.50
>>
>
>http://www.egghead.com/category/inv/00074283/032760
At 10:12 PM +1100 09/25/00, John F. Lambert wrote:
>>Ken Gillett wrote:
>>>
>>> But I still maintain that NO software should cause unrequested
>>> dialups, I'm sorry if you don't agree. I don't accept that it is
>>> beyond the realms of possibility to only perform such checks if it
>>> doesn'
>After the client reboots, it suddenly doesn't work, unless i stop&start
>the Retrospect Client service on the 2000 machine after it boots.
Hi Martjin,
It sounds like you're backing up via static IP addresses but the clients
are running on DHCP. Therefore, when they reboot they'll have a new IP
> But can SIMS collect from a POP3 account and redistribute to local
> addresses as does FetchMail and ASIP is supposed to do (but you
> cannot configure it properly so it's not a useful as it appears)?
Mailtron Gateway
http://www.versiontracker.com/moreinfo.fcgi?id=2723
--
---
hello,
I'm having problems with the Windows 2000 clients getting backed up. Everything
is setup correctly, cause when i test it, the Backup Server can backup just
fine. After the client reboots, it suddenly doesn't work, unless i stop&start
the Retrospect Client service on the 2000 machine after
16 matches
Mail list logo
