I see the same behaviour on RC2. I have to restart the daemons to get it to
work.
I looked through the logs, and nothing was obvious.
Sent from my iPad
> On May 17, 2019, at 10:06, Tom Van Gorkom wrote:
>
> Using Riv 3.0 with CentOS 7 with the Livewire driver on a standalone for both
> te
Add a usb sound card ?Verzonden vanaf mijn Samsung-apparaat
Oorspronkelijk bericht
Van: Seth Stevenson
Datum: 17-05-2019 20:57 (GMT+01:00)
Aan: Fred Gleason
Cc: rivendell-dev@lists.rivendellaudio.org
Onderwerp: Re: [RDD] GPIO on Raspberry Pi
So basically, I got it
I’d check /var/log and see what it has to say.
Sent from my iPhone
> On May 17, 2019, at 9:05 AM, Fred Gleason wrote:
>
>> On Fri, 2019-05-17 at 09:06 -0500, Tom Van Gorkom wrote:
>> Running a series of about 20 logs in a loop, RDairplay runs fine for
>> about 3 days at a time and then starts s
So basically, I got it to work. The button on the switcher activates the
macro and plays the audio file in rdairplay. However, there is no sound,
due to rivendell competing with the soundcard installed on top of the gpio.
Not sure there is any way to get around that except to use the pi onboard
aud
On Fri, 2019-05-17 at 09:06 -0500, Tom Van Gorkom wrote:
> Running a series of about 20 logs in a loop, RDairplay runs fine for
> about 3 days at a time and then starts scrolling rapidly through each
> log. I have to force quit RDairplay and restart it again. I re-
> generated all of the logs to ma
Using Riv 3.0 with CentOS 7 with the Livewire driver on a standalone for
both testing and a backup audio source if the automation goes quiet...
Running a series of about 20 logs in a loop, RDairplay runs fine for about
3 days at a time and then starts scrolling rapidly through each log. I have
to
If you shut down everything Rivendell on the machine, can you get the jack
stuff to start on it?
all the best,
drew
On Fri, May 17, 2019 at 7:02 AM Pedro Pancorbo Arroyo <
pedro_panco...@hotmail.com> wrote:
> Hi again.
>
> Finally I managed to install Rivendell on Ubuntu and make it recognize m
Hi again.
Finally I managed to install Rivendell on Ubuntu and make it recognize my
M-audio FastTrack Pro. But, when I try to start Cadence, it fails. Logs prompt
this issue:
ATTENTION: The playback device "hw:Pro" is already in use. Please stop the
application using it and run JACK again
Fri
