well that why we will probably add an option to all network based alerts
(excep SMTP for obvious reasons) an option to "fall back on DUN", meaning
that we first try to "send" the alert via the normal network connection and
if this fails we can try it via dial-up networking (DUN).
(why not for SMTP
Title: RE: [SA-list] SMS Alpha paging problem
The
"other" is not in the US :-)
dirk.
-Original Message-From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]On Behalf Of Joe
LawsonSent: Fri Jul 11 9:45 PMTo:
'[EMAIL PROTECTED]'Subject: RE: [SA-list] SMS Alpha paging
problem
Title: RE: [SA-list] SMS Alpha paging problem
"That's unfortunate"...What he said!
I'm using Skytel and have a similar problem in that only about 1/2 pages connect. Is there a connection to your "other provider"?
Joe Lawson
-Original Message-
From: Ryan White [mailto:[EMAIL PROTE
That's unfortunate. How do you page if your main pipe to the internet
goes down? On the other hand, a POTS line almost NEVER breaks, even
during power outages. That's why I use TAP. Once TAP is unavailable, say
goodbye to reliable paging during network outages.
-ryan.
-Original Message-
F
Thanks Luis. I removed the dahes (-'s) from the number I'm dialing, and
also changed the setting in the registry under servers alive/paging,
that's called "wait to connect" or something like that...it's default at
10 seconds, I change it to 60. Verizon's web page says you should set
your software t
Dirk,
The parameter have been checked and the baud rate put down to 2400, but only 1 out of
5 (at best) page are passing...
Serge
>>> [EMAIL PROTECTED] 2003-07-11 13:41:46 >>>
Are you 100% sure of the parameters?
Try to use the SMSC number with the - in it.
Also make sure that the modem setting
We're currently working on the SMPP protocol because a provider (which I'm
not gonna name and no it's not Verizon) had to admin that it's TAP gateway
was very unstable.
So I wouldn't be surprised if other providers have similar problems with
their TAP gateway.
Also I was told by somebody within t
Here are my settings for comparison.
Using internal USR 56k modem
comm settings: 7e1
baudrate: 2400
SMSC no. 18668230501
Protocol: TAP
>>> "Ryan White" <[EMAIL PROTECTED]> 07/11/03 11:21AM >>>
Hmm...unfortunately I already tried 2400. It's been set that way for
about a week, and I'm still loosin
Hmm...unfortunately I already tried 2400. It's been set that way for
about a week, and I'm still loosing 4/5 pages I test. Either something
in SA is configured wrong, or Verizon isn't accepting a lot of TAP
requests anymore?
-ryan.
-Original Message-
From: Luis Rosales [mailto:[EMAIL PROT
I use Verizon, and I too had a similar problem. only about 1 out of every few pages
sent, would be delivered. I even went so far as to format and reinstall my SA machine
to try and solve the problem. Seemed to have worked perfectly with the older versions
of SA. I finally solved my problem b
Are you 100% sure of the parameters?
Try to use the SMSC number with the - in it.
Also make sure that the modem settings are correct (baud rate).
dirk.
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
Behalf Of Serge Couture
Sent: Fri Jul 11 7:35 PM
To: [EMAIL PROT
Funny, I've been experiencing this *exact* same problem. At my last
company I used dialup/TAP to page using Verizon for the last 2 years,
worked great. Then, I just implemented SA at my new job, and I started
having these problems. I won't send my logs, because they look
identical. Logon: failed. I
I've been trying to receive alpha paging and tried about everything I could without
success.
First, I must say that with different software (even one I program myself) I'm able to
receive messages with the same parameters than those I entered in ServersAlive, latest
build (v4.0.1458).
Here's
1. I see your point. Perhaps remove all occurrences of selected alert and
warn as such before doing so. ("This will erase all primary smtp alerts
from your (sub group or group or whatever) are you sure you want to do
this?) I am thinking in terms of removing a certain alert because I was
using w
1. How to select the alert? Just saying remove the SMTP alert isn't good
enough since you could have several SMTP alerts per entry. We thought about
it but THE issue is how to determine which alert to remove.
Same issue for the edit of them.
2. You can already make groups within groups and as su
I finally got time to check out the new global change replace feature. I
love it. It is much better than the old. I have long awaited the ability
to change (globally) alerts by group and subgroup. A few suggestions
(probably already in progress but I am going to throw them out there anyway)
1
New tag for the HTMLTemplates it will show the time that
an entry is on a specific status. Example output
3d 7h 32m 45s
(the d -> day part will not be shown if it's 0)
http://www.woodstone.nu/soft/beta/salive4.exe
(4.0.1458 or more recent)
dirk.
Just to follow up w/the group so it's on the list archives, it appears
that Richard's modifications to the template broke something. I just
downloaded 1457, and SangfroidJr is working fine. Richard had
modified the code to put certain entries in red.
Brent
Friday, July 11, 2003, 7:16:22 AM, y
Is the SangfroidJr installation publicly available, so we can see the
web page? If not, go into your web browser, view the page, and click
File, Save As HTML, and then send that file to [EMAIL PROTECTED]
Brent
Friday, July 11, 2003, 7:16:22 AM, you wrote:
RT> Yep, that's exactly what I see.
Yep, that's exactly what I see.
If "RUNNING" <> "RUNNING" then is on each check in the default.asp
file.
Best wishes
Richard Temple
Networks Team Leader
Dynix
[EMAIL PROTECTED]
p 01494 777582
f 01494 777600
http://www.dynix.com
-Original Message-
From: Brent Ozar [mailto:[EMAIL PRO
euh still gives RUNNING
dirk.
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
Behalf Of Brent Ozar
Sent: Fri Jul 11 2:08 PM
To: Richard Temple
Subject: Re: [SA-list] SAlive 4.0.1457 & Sangfroid Jr
The default_template.asp uses this code line in order to determin
The default_template.asp uses this code line in order to determine which
checks to show:
<%
'Only show down servers
If "" <> "RUNNING" then
%>
ServersAlive takes that template, turns it into ASP, and a typical
running check would look like this:
<%
'Only show down servers
If "RUNNING" <> "RUNNIN
Title: Message
Is anyone using the
latest beta with the Sangfroid Jr template ? Since upgrading, the default.asp
file that is being produced now shows every single check in RED, regardless of
whether it's down, maintenance or running.
Best wishes
Richard
TempleNetworks Team LeaderDynix
23 matches
Mail list logo
