RE: [SA-list] Network Route Build Faiure

2012-05-22 Thread Dirk Bulinckx
The only reason for this to happen (at least that I can see) is that the interface numbers change. Within the entriesfile we keep the interface number (RINT) and when performing the route add or when showing the settings in the GUI we use that parameter. If the numbers of the interfaces

RE: [SA-list] Network Route Build Failure

2012-05-22 Thread Barry George
Anthony, Would you be running SA on Windows Server 2008 R2 by chance? Barry From: Dirk Bulinckx [mailto:d...@woodstone.nu] Sent: May-22-12 3:46 AM To: Servers Alive Discussion List Subject: RE: [SA-list] Network Route Build Faiure The only reason for this to happen (at least

RE: [SA-list] Network Route Build Failure

2012-05-22 Thread Jason Passow
I would suspect he is running server 2003 and using a multihomed (2 or more nics) computer with both NICs on the same subnet. Ran into this one once before on a different project. Although from my experience the loopback adapter always stayed at #1. Perhaps the interface is changing and

RE: [SA-list] Network Route Build Failure

2012-05-22 Thread Anthony Laatz
Good ol Windows XP 32bit. J Getting ready to move it to a Windows 7 Pro 64bit soon. I would throw it on one of my servers, but then if the server it is on dies, no one would ever know, cause SA would be dead too.. lol ;] Thank you, anthony Laatz | appletree Answers p: 800.270.7030

RE: [SA-list] Migration from v6 to v7 and GROUPS

2012-05-22 Thread Anthony Laatz
Most likely you missed a step, it happens... I for one was a typical IT person and didn#8217;t read the instructions at all. J But did it again later following the steps and worked perfectly. Thank you, anthony Laatz | appletree Answers p: 800.270.7030 f: 866.827.8802 e:

Re: [SA-list] Migration from v6 to v7 and GROUPS

2012-05-22 Thread Dirk Bulinckx
The setup should handle this correctly - Original Message - From: Jean-Pierre Paradis (mailto:jean-pierre.para...@fsa.ulaval.ca) To: Servers Alive Discussion List (mailto:salive@woodstone.nu) Sent: Tuesday, May 22, 2012 4:15 PM Subject: [SA-list] Migration from v6 to v7 and GROUPS

RE: [SA-list] Network Route Build Failure

2012-05-22 Thread Barry George
Right, might want to check these out: IP address and default gateway settings are assigned incorrectly in Windows Vista, in Windows Server 2008, in Windows 7, and in Windows Server 2008 R2 http://support.microsoft.com/kb/2473489 (http://support.microsoft.com/kb/2473489) Or the problem

RE: [SA-list] Migration from v6 to v7 and GROUPS

2012-05-22 Thread Barry George
Me three... ;) Barry From: Anthony Laatz [mailto:ala...@appletreeanswers.com] Sent: May-22-12 11:01 AM To: Servers Alive Discussion List Subject: RE: [SA-list] Migration from v6 to v7 and GROUPS Most likely you missed a step, it happens... I for one was a typical IT person and

RE: [SA-list] Network Route Build Failure

2012-05-22 Thread Jason Passow
My previous comment most likely applies to XP as well. Although Microsoft doesn't specify it since advanced route options are not a typical function of a desktop computer. Jason Passow Network Administrator Mississippi Welders Supply http://www.mwsco.com (http://www.mwsco.com)

RE: [SA-list] Migration from v6 to v7 and GROUPS

2012-05-22 Thread Jean-Pierre Paradis
My ServersAlive is not installed in #8220;C:\Program Files#8221; but in #8220;c:\system\apps\Salive\#8221;, could this have caused the problem ? [HKEY_LOCAL_MACHINE\SOFTWARE\DBU Consulting\Servers Alive] Path=c:\\system\\apps\\Salive\\ During the install I also received an error about

RE: [SA-list] Migration from v6 to v7 and GROUPS

2012-05-22 Thread Dirk Bulinckx
That could indeed be the issue Dirk Bulinckx Servers Alive - http://www.woodstone.nu (http://www.woodstone.nu/) StellarDNS (DNS Hosting) - http://www.stellardns.com (http://www.stellardns.com/) From: