I tested on two different Samba Servers with 3.0.3 installed before.
With 3.0.3 I had no problems, but after upgrading to 3.0.4 or 3.0.5pre1
I had that problems. I also tested with new installed workstation systems,
but also I had thar problems. I found systemlog entries on the workstation,
wic
Hello,
I had that problem, too.
The reason therefor were bad rights on the printer.
That solved the problem for us.
Maybe that can helpyou.
MfG Stefan
--
To unsubscribe from this list go to the following URL and read the
instructions: http://lists.samba.org/mailman/listinfo/samba
Hello Andrew,
I also tested with 3.0.5pre1, and I also have to change the regvalue,
otherwise I
get the error, that there is no domain controller or the computer account
is unknowen.
Stefan
Andrew Bar
Hello List,
only an info.
if it is known, so please excouse my mail, but if not, please notice:
with Samba 3.0.4 you have again to set the regvalue requiresignorseal to 0
MfG Stefan Iven
--
To unsubscribe from this list go to the following URL and read the
instructions: http
Hello,
after upgrading to Samba 3.0.3 I have the following:
I have a printershare called ibvhp750+. If I browse the network, I see that
share with exact that name.
If I doubleclick the systemfolder printers on the server, I see the same
share.
After uploading the printerdriver to the server,
Hello list,
i use now Samba 3.0.2 as PDC with LDAP backend on suse sles8. With the
other versions
of Samba3 I hade the same problems with the lpq command.
I use CUPS printing system with raw options. The clientdrivers
are installed on serverside.
my smb.conf in the global part
printi
Hello,
my Problems are now gone with samba 3.0.2 rc2.
So I think it was a kind of bug in 3.0.2 rc1.
Thanks for help
Stefan
>Hi,
>
>check first your cupsd ,smbd logs
>/var/spool/samba
>/var/lib/samba/drivers
>is writable for your user ?
>
>have you kind of this
>[print$]
>comment = pr
Hello list,
now I do not have a problem with Samba3. I have only a
question where I need some suggestions:
We have Lotus Notes Domino Server 6.5. This Server is
reachable via Internet and an Internetbrowser.
The application this Domino Server is running is an
projectmanagment system. A lot of
Hello list,
I upgraded from Samba3.0.1 to Samba3.0.2rc1 and got now following
problems:
LaserJet printers 6MP (sorry, we have no other LaserJet printermodels)
now couse the application to crash. With Samba3.0.1 there was no
probem with that kind of Printers.
I use the RPM's from ftp.sernet.d
Hello Jerry,
Yes, 3.0.1 fixed that problem.
Thank you very much.
Greetings Stefan
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
[EMAIL PROTECTED] wrote:
| I setup samba3.0.1pre3+ldap as PDC. NT and 2k Workstation
| work. I can add xp clients to the domain. But when then
| the user logs i
Hello list,
I setup samba3.0.1pre3+ldap as PDC. NT and 2k Workstation work.
I can add xp clients to the domain. But when then the user logs in, the
xp stops nearly all services after the authentication:
login-, workstation-, browser-,audio- etc. service
When I login as domainadmin,go to the
Hello,
I never testes Samba3 with smbpasswd backend.
With LDAP I had the most problems with wrong
smb.conf settings.
Useinng smbldap tools, and setting the following entries in
smb.conf work for me. Adding, changing, deleting for User and
Global Groups work fine. You only have to do a screenre
>Can I use "User Manager for Domains" (usrmgr.exe) in a samba 3.0 domain?
>When I tried to add a user with usrmgr I Received error "Access Denied"
but the user was created in ldap and it was >added as a memberUid in Domain
Users group.
>Is "User Manager for Domains" compatible with samba 3.0
Hello List,
I found the following entry in my logmessage from a Samba3 server:
Nov 21 12:07:42 ibvbfs1 smbd[2119]: [2003/11/21 12:07:42, 0]
libsmb/cliconnect.c:attempt_netbios_session_request(1460)
Nov 21 12:07:42 ibvbfs1 smbd[2119]: attempt_netbios_session_request:
WS103 rejected the sess
>This could be a possibility. how do i change this? what makes me wonder a
>little bit, is that i just cannot print via the samba (smb-protocol). but
>locally it works finebut perhaps your workaround helps me...which
>driver did you take for your psc750? i am using the hpjis-driver
in smb
I had the same, when I was trying to print on Cups printer
with vendor drivers.
I switched on raw printing, (because i need it) and everything was fine.
Maybe you are using vendordivers and not postscriptdrivers??
Stefan
>still have this problems using the hp psc750. found now some funny e
Sorry, I mean the printing command in smb.conf.
Did you take a look in the logfile of cups?
MfG Stefan
--
To unsubscribe from this list go to the following URL and read the
instructions: http://lists.samba.org/mailman/listinfo/samba
>hi all,
>
>i have samba 3.0 on a fedora-linux running. almost everyting works fine,
>except one printer, my hp psc 750 (connected via usb) is not printing via
>samba.
>
>
>I get pages printed (via cups or whatever) if i print from the localhost.
>
>So, here a few data from my smb.conf:
> pri
Sorry, I have forgotten, that you need You Net::LDAP for smbldap tools.
You can use RPM or install via perl -MCPAN -e "install Net::LDAP"
>>Hi Patrick!
>>
>>Glad to here, that the thing works. I got the same problem. But the
>>smb.conf always looked like that!
>>
>>
>>So question: which versio
>Hi Patrick!
>
>Glad to here, that the thing works. I got the same problem. But the
>smb.conf always looked like that!
>
>
>So question: which version of the scripts are you using? Can you add
>Machines "on the fly" from windows? How about the smbldap_conf.pm?
>
>chris
Yes, you can,
with smbl
Hello,
>
>> I set up Samba as an PDC.
>> I generated shares and printershares.
>> I browsed my network over the Networkneighborhood down to my
Sambaserver.
>> There I can see all File and Printershares.
>> I doubleclicked
>
>Which client Win OS are you using?
Client OS from Win NT 4.0 SP6a,W2K
Hello Kurt,
first I like to thank you that you try to help me.
I will try to explain my problem exactly.
Here is what I have done.
I set up Samba as an PDC.
I generated shares and printershares.
I browsed my network over the Networkneighborhood down to my Sambaserver.
There I can see all Fil
Hi there,
Ok. My last postings about my problems with printerinstalation over
controlpanel were
still not answered.
So maybe I have to ask my question in an other way.
Is someone able to install a printer shared by Samba 3/Samba pre3 x over
the controlpanel?
I can't. I can't see my Server. I
Hello,
yes, swat has the same problem in pre3
MfG Stefan
--
To unsubscribe from this list go to the following URL and read the
instructions: http://lists.samba.org/mailman/listinfo/samba
Hello together,
I realy need help!!
i use samba3 as PDC with LDAP. Everything works fine.
I can browse the network over networkneighborhood and there
i can see all shares and printers.
But if i go to the controlpanel of a ms-client (NTsp6a or W2k sp4), go to
printers, new printers,
choos ne
Hello together,
I posted this question a few days ago, but I still have problems
with printerinstallation over controlpanel.
i use samba3 as PDC with LDAP. Everything works fine.
I can browse the network over networkneighborhood and there
i can see all shares and printers.
But if i go to the
Hello together,
i use samba3 as PDC with LDAP. Everything works fine.
I can browse the network over networkneighborhood and there
i can see all shares and printers.
But if i go to the controlpanel of a ms-client (NTsp6a or W2k sp4), go to
printers, new printers,
choos networkprinters,click ne
27 matches
Mail list logo
