Hello,
I'm having a little problem after logging into domain via samba, after a few
minutes the squid no longer authenticates the users through single sign on and
keeps asking for authentication in the browser without stopping.
below is my settings and error logs.
smb.conf
[global]workgroup = SAL
On Thu, 2013-10-10 at 13:18 +0200, Achim Gottinger wrote:
> Hi,
>
> I'm testing an classic migration from samba3/openldap to samba4 on
> debian wheezy. Last time i did this i used an self compiled samba4
> installation. I followed the howto and used openldap with an cloned db
> on my new server
Hi,
I'm testing an classic migration from samba3/openldap to samba4 on
debian wheezy. Last time i did this i used an self compiled samba4
installation. I followed the howto and used openldap with an cloned db
on my new server. Now I try the same with sernet's samba4 packages. But
sernet-samba
On Wed, 2013-10-02 at 10:47 -0300, Silvio Aparecido wrote:
> Hello,
>
> first, sorry by duplicated email, my last have write errors
>
> I'm having a little problem after logging into domain via samba, after a
> few minutes the squid no longer authenticates the users through single
> sign on and
On 10/04/2013 08:26 AM, Silvio Aparecido wrote:
Hi
I'm having a little problem after logging into domain via samba, after a
few minutes the squid no longer authenticates the users through single
sign on and keeps asking for authentication in the browser without stopping.
below is my settings an
Hi
I'm having a little problem after logging into domain via samba, after a
few minutes the squid no longer authenticates the users through single
sign on and keeps asking for authentication in the browser without stopping.
below is my settings and error logs.*
**
smb.conf*
[global]
workgroup =
Hello,
first, sorry by duplicated email, my last have write errors
I'm having a little problem after logging into domain via samba, after a
few minutes the squid no longer authenticates the users through single
sign on and keeps asking for authentication in the browser without stopping.
belo
Hello,
I'm having a little problem after logging into domain via samba, after a few
minutes the squid no longer authenticates the users through single sign on and
keeps asking for authentication in the browser without stopping.
below is my settings and error logs.
smb.conf
[global]workgroup = SA
On Wed, 2013-09-25 at 14:25 +0200, Stefania Rampini wrote:
> Hello all,
>
> I am running Samba 2.2.8a
Stop right here. This version is so long un-supported and out of date
it just isn't even funny. Please upgrade to a supported release,
preferably Samba 4.0.
Your issue almost certainly r
Hello all,
I am running Samba 2.2.8a and am trying to connect to a
Windows 2003 domain controller server1 (BDC – back up). I keep getting the
error "Tree connect
failed - NT_Status_Access_Denied" I have another domain controller server2 (PDC
- primary)in the
same domain with the same share
Hi Greg,
Thank you for your answer.
Yes, I installed the dns service in the same time I promoted the windows
server.
When I checked the windows dns, it seemed to be well populated but there
maybe some deep record that I missed.
So, when I tried to stop samba windows used it's own dns server.
Hello,
I recently migrated our samba 3 domain to an AD domain using Samba 4
classic upgrade tool.
DNS is provided by the internal dns server of Samba 4.
I promoted a Windows 2k8 box as a new DC of this domain and I transfer
all the 5 FSMO roles to this windows box.
Now I would like to demo
Hi,
I have problem with GPO and dns/kerberos resolution
I do a samba -i -d3 to a log file and started on client: gpupdate /force:
lpcfg_load: refreshing parameters from /srv/samba/etc/smb.conf
params.c:pm_process() - Processing configuration file
"/srv/samba/etc/smb.conf"
samba version 4.1.0rc2
De : Stéphane PURNELLE
> A : samba@lists.samba.org,
> Date : 06/09/2013 10:22
> Objet : [Samba] Problem with kerberos and GPO
> Envoyé par : samba-boun...@lists.samba.org
>
> Hi,
>
> I have problem with GPO and dns/kerberos resolution
>
> I do a samba -i -d3 to a log fil
Hi,
I have problem with GPO and dns/kerberos resolution
I do a samba -i -d3 to a log file and started on client: gpupdate /force:
lpcfg_load: refreshing parameters from /srv/samba/etc/smb.conf
params.c:pm_process() - Processing configuration file
"/srv/samba/etc/smb.conf"
samba version 4.1.0rc2
Hi all,
Ours is a setup of 30 Windows multi master DCs currently running with
different servers (windows 2003 , Windows 2008 , Windows 2008 R2) . Till
now it is running there is no issues with replication among the Winodws
servers.
Now recently i joined a Samba4 DC in the network as a replicating
28/08/2013 11:52
Objet : Re: [Samba] Problem with nslcd and samba
Envoyé par :samba-boun...@lists.samba.org
On Wed, 2013-08-28 at 11:03 +0200, Stéphane PURNELLE wrote:
> Hi,
>
> On the DC
>
> File-server and DC are on the same server.
Hi
Is it really there?
nslookup admin01
On Wed, 2013-08-28 at 11:03 +0200, Stéphane PURNELLE wrote:
> Hi,
>
> On the DC
>
> File-server and DC are on the same server.
Hi
Is it really there?
nslookup admin01
ldbsearch --url=/usr/local/samba/private/sam.ldb cn=admin01
samba-tool domain exportkeytab /tmp/test.keytab --principal=ADMIN01$
:19:
> De : steve
> A : samba@lists.samba.org,
> Date : 28/08/2013 10:59
> Objet : Re: [Samba] Problem with nslcd and samba
> Envoyé par : samba-boun...@lists.samba.org
>
> On Wed, 2013-08-28 at 10:34 +0200, Stéphane PURNELLE wrote:
> > Hi,
> >
> > I try
On Wed, 2013-08-28 at 10:34 +0200, Stéphane PURNELLE wrote:
> Hi,
>
> I try to use nslcd with samba 4 for get suers and group for AD.
> if I do a ldapsearch, I have a message :
>
> Server not in kerberos database
Hi
You get those errors when you are not joined to the domain. Is this the
DC or a
Hi,
I try to use nslcd with samba 4 for get suers and group for AD.
if I do a ldapsearch, I have a message :
Server not in kerberos database
if I do a getent passwd, nslcd display same error message.
log of samba4:
[2013/08/28 10:15:47, 3]
../source4/auth/kerberos/krb5_init_context.c:80(sm
I think I've come across this same problem, although I'm migrating from
3.0.33 (CentOS5) to 3.6 (CentOS6).
I've migrated the domain controller from 3.0.33 to 3.6 first. I dumped
and restored the passwd, secrets and schannel_store tdb files from 3.0
to 3.6, and also migrated the linux accounts
On Fri, 2013-08-23 at 17:15 +, Eduardo Sotomayor wrote:
> I am having two problems when testing the samba4 installation
>
> and this one is when running klist -k
>
> sienicdc1:/home/eduardo # klist -k
> Keytab name: FILE:/etc/krb5.keytab
> klist: no such file or directory while starting keyt
I am having two problems when testing the samba4 installation
this problem is when running smbclient //localhost/netlogon -Uadministrator% -c
'ls'
sienicdc1:/home/eduardo # smbclient //localhost/netlogon -Uadministrator% -c
'ls'
Anonymous login successful
Domain=[SIENIC] OS=[Unix] Server=[Sam
Hello Andrew,
Sorry for waiting so long to answer you but I would like to be sure to
try every thing before.
So, I tried to shut down samba and follow the procedure to remove a
failed DC, but I when shut down samba my windows DC failed saying me
that the domain could not be found when i laun
On Fri, 2013-08-02 at 08:34 -0300, Jonis Maurin Ceará wrote:
> But what roles Andrew?
> All 5 roles are already on windows DC. What's those 2 left roles and how
> can we transfer?
What I'm saying is just follow whatever advise Microsoft gives for using
their GUI tools to remove a dead DC from the
But what roles Andrew?
All 5 roles are already on windows DC. What's those 2 left roles and how
can we transfer?
Em 01/08/2013 23:11, Andrew Bartlett escreveu:
On Wed, 2013-07-31 at 15:10 +0200, Davy HUBERT wrote:
Hi all,
I recently migrated our samba 3 domain to an AD domain using Samba 4
c
On Wed, 2013-07-31 at 15:10 +0200, Davy HUBERT wrote:
> Hi all,
>
> I recently migrated our samba 3 domain to an AD domain using Samba 4
> classic upgrade tool. Well, every seems to work fine since i'm still
> alive ;) .
>
>
> I promoted a Windows 2k8 box as a new DC of this domain and I trans
Hi all,
I recently migrated our samba 3 domain to an AD domain using Samba 4
classic upgrade tool. Well, every seems to work fine since i'm still
alive ;) .
I promoted a Windows 2k8 box as a new DC of this domain and I transfer
the 5 FSMO roles to it.
Now I would like to demote the Samba4
Hello Marc,
Le 31/07/2013 15:50, Marc Muehlfeld a écrit :
Hello Davy,
Am 31.07.2013 15:35, schrieb Davy HUBERT:
I recently migrated our samba 3 domain to an AD domain using Samba 4
classic upgrade tool. Well, everything seems to work fine since i'm
still alive ;) .
I promoted a Windows 2k8 b
In my case, all transfer was made using windows GUI and no errors,
everything fine.except those 2 'extra' roles, which i don't know
(and fsmo show doesn't show).
Em 31/07/2013 11:00, Ricky Nance escreveu:
I had this happen the other day and ran it down to the DomainDNS and
ForestDNS not tr
I had this happen the other day and ran it down to the DomainDNS and
ForestDNS not transferring fully. I haven't yet had time to file a bug on
this.
Ricky
On Wed, Jul 31, 2013 at 8:35 AM, Davy HUBERT wrote:
> Hi all,
>
> I recently migrated our samba 3 domain to an AD domain using Samba 4
> cla
Hello Davy,
Am 31.07.2013 15:35, schrieb Davy HUBERT:
I recently migrated our samba 3 domain to an AD domain using Samba 4
classic upgrade tool. Well, everything seems to work fine since i'm
still alive ;) .
I promoted a Windows 2k8 box as a new DC of this domain and I transfer
the 5 FSMO roles
I had the same problem some days ago.no reply from list and still
with same problem :(
Em 31/07/2013 10:35, Davy HUBERT escreveu:
Hi all,
I recently migrated our samba 3 domain to an AD domain using Samba 4
classic upgrade tool. Well, everything seems to work fine since i'm
still alive
Hi all,
I recently migrated our samba 3 domain to an AD domain using Samba 4
classic upgrade tool. Well, everything seems to work fine since i'm
still alive ;) .
I promoted a Windows 2k8 box as a new DC of this domain and I transfer
the 5 FSMO roles to it.
Now I would like to demote the S
Hi,
First of all I’d like to thank Samba 4 Dev Team. New Samba is a great product.
I want to replace old Windows 2000 SBS in my school network. I’mtesting Samba
in Virtualbox with 2 network cards. 1st network card (eth0) is connected to the
Internet. Next card is connected to the Internal ne
Dear all,
I have a setup of MultiDCs currently running in Windows 2008 R2 .
Now I have successfully joined a Samba4 DC (gt version) with my Windows
DC. Replication works perfectly from Windows Dc to Samba DC., but the other
way is not working.
When i add a user in samba dc it is not getting rep
HI !
I have a problem with nmbd, i can't logon on a WinXP machine (wfassi-PC
,everything was alright until at a moment user coudnt connect anymore) ,
here is log.nmbd :
[2013/07/15 16:39:26, 5] libsmb/nmblib.c:797(read_packet)
Received a packet of len 50 from (192.168.0.89) port 137
[2013
enstag, 25. Juni 2013 17:23
An: Roberto Scattini
Cc: samba@lists.samba.org
Betreff: Re: [Samba] problem over vpn
On 6/25/2013 10:12 AM, Roberto Scattini wrote:
> hi david,
>
>
> On Tue, Jun 25, 2013 at 12:06 PM, "David González Herrera - [DGHVoIP]"
> < i...@dghvoip.c
On Tue, Jun 25, 2013 at 12:44 PM, Roberto Scattini <
roberto.scatt...@gmail.com> wrote:
> On Tue, Jun 25, 2013 at 12:23 PM, "David González Herrera - [DGHVoIP]" <
> i...@dghvoip.com> wrote:
>
>> i do have the traffic capture on both ends, where i can upload them?
>>
>> Well, I wouldn't know what
On Tue, Jun 25, 2013 at 12:23 PM, "David González Herrera - [DGHVoIP]" <
i...@dghvoip.com> wrote:
>
> i do have the traffic capture on both ends, where i can upload them?
>
> Well, I wouldn't know what to do with the capture because I'm no expert
> reading that but there's lots of gurus here so t
On 6/25/2013 10:12 AM, Roberto Scattini wrote:
hi david,
On Tue, Jun 25, 2013 at 12:06 PM, "David González Herrera - [DGHVoIP]" <
i...@dghvoip.com> wrote:
On 6/25/2013 9:58 AM, Roberto Scattini wrote:
hi all,
i have a Samba version 3.2.5 server running in a debian 5.0.8 (a little
old, i k
hi david,
On Tue, Jun 25, 2013 at 12:06 PM, "David González Herrera - [DGHVoIP]" <
i...@dghvoip.com> wrote:
> On 6/25/2013 9:58 AM, Roberto Scattini wrote:
>
> hi all,
>
> i have a Samba version 3.2.5 server running in a debian 5.0.8 (a little
> old, i know...).
>
> the network setup is:
>
> -o
On 6/25/2013 9:58 AM, Roberto Scattini wrote:
hi all,
i have a Samba version 3.2.5 server running in a debian 5.0.8 (a little
old, i know...).
the network setup is:
-one local office using samba
-one remote office (we call it cberg) using samba remotely over a vpn
(linksys-cisco)
Here's you p
hi all,
i have a Samba version 3.2.5 server running in a debian 5.0.8 (a little
old, i know...).
the network setup is:
-one local office using samba
-one remote office (we call it cberg) using samba remotely over a vpn
(linksys-cisco)
-another remote office (we call it colon) using samba remotel
Just a guess: Do you have a libtdb-devel (or something like that) package
installed? If so, maybe try uninstalling it before compiling Samba. Then
Samba will use its own built-in version.
On 24 June 2013 09:34, Stéphane PURNELLE wrote:
> Hi all,
>
> I have a problem when I try to compil samba
Hi all,
I have a problem when I try to compil samba 4.0.6 on my test machine
(suse linux enterprise server 11 SP2 32-bits).
output of compilation :
[3353/3781] Linking default/lib/param/libsamba-hostconfig.so
[3354/3781] Linking default/lib/tdb_wrap/libtdb-wrap.so
[3355/3781] Linking de
To list (and everyone who helped me)
I tracked down the problem to the init.d script. (The one you
download from samba) Something is just not quite configured right. Once
I moved that out of my /etc/init.d directory and restarted manually. As
they say: "It's all good!" I will have to take
Hello Marcelo,
Am 07.06.2013 03:30, schrieb Marcelo Ruriani:
Thank you for the reply. To answer your questions. I am using the
internal DNS. The DNS testing reveals that host -t SRV _ldap (and so on)
plus host -t SRV _kerberos (and so on) return with a "not found" error.
The A record test works
Hello Marcelo,
Am 07.06.2013 16:51, schrieb Ricky Nance:
by the way, why isn't samba listening on port 88 in
your last mail?
* Can you check, if something else is listening on the kerberos port 88:
# netstat -taunp | grep ":88"
* Please also show us the [global] part of your smb.conf. Exp
Re provisioning will wipe out your entire samba DB, so I would try to avoid
that if at all possible, figure out if something else is listening on port
88, stop it, and restart samba (its the kerberos stuff). The smbclient
command isn't all that helpful (sometimes it is, sometimes not), so you may
On 6/7/13 10:51 AM, Ricky Nance wrote:
I'd double check on the samba server it self if you can connect to it
using smbclient... `smbclient //localhost/sysvol -Uadministrator`
if that fails try `smbclient //localhost/sysvol -d5 -Uadministrator`
and paste the output in your reply. If it succ
I'd double check on the samba server it self if you can connect to it using
smbclient... `smbclient //localhost/sysvol -Uadministrator` if that
fails try `smbclient //localhost/sysvol -d5 -Uadministrator` and paste the
output in your reply. If it succeeds then you can pretty much bet on a
conn
On 6/6/13 5:15 PM, Marc Muehlfeld wrote:
Hello Marcelo,
Am 06.06.2013 22:47, schrieb Marcelo Ruriani:
It seems I locked myself out. I have tried these steps: turn off the
firewall, ntacl sysvol reset, and dis-join from domain.
The ntacl sysvol reset returns errors (which I'll post if necessary)
Hello Marcelo,
Am 06.06.2013 22:47, schrieb Marcelo Ruriani:
It seems I locked myself out. I have tried these steps: turn off the
firewall, ntacl sysvol reset, and dis-join from domain.
The ntacl sysvol reset returns errors (which I'll post if necessary) the
dis-join worked fine but I cannot re-
To all,
I have run into a problem. I am running Samba 4.1.0 pre1-git-94f11e9 and
I shut down our server to do regular maintenance. Unknown to me at the
time, a machine was connected. I know, ugh!! Anyway, when I rebooted and
tried to use the AD users and groups tool, I get an error stating that
Hi everybody.
I´ve installed a new OpenLdap Server and performed the migration of the
database. All information was imported sucessfull because all my other
authentication services are working perfectly.
I have a domain in my ldap server and a FreeBSD machine that work as domain
PDC for a d
Hi,
After upgrading debian 6 to version 7 samba stopped working properly.
Log:
[2013/05/23 08:29:55.811240, 1] auth/server_info.c:386(samu_to_SamInfo3)
The primary group domain
sid(S-1-5-21-3651478259-4121578499-3132057975-513) does not match the
domain sid(S-1-5-21-3182595135-1874831366-4
I am following this guide
https://wiki.samba.org/index.php/Samba4/Domain_Member to add my Samba 4.0.3
file server as a Member Server, but I am stuck with an error message after
trying to run this command:
# net ads join -U administrator
Using short domain name -- SAM
Joined '' to dns domain 'sam.b
On 02/28/2013 03:47 PM, Andrew Martin wrote:
- Original Message -
From: "Chantal Rosmuller"
To: samba@lists.samba.org
Sent: Thursday, February 28, 2013 7:53:44 AM
Subject: Re: [Samba] problem with adding printers to samba4 [solved]
I solved it myself, the rpm I install
The problem here was the [share] definition was located above the [global]
section. Testparm showed the additional things that got added that made the
share rights fail.
2013/3/10 Daniel Hedblom
> I have some difficulties setting rights from Windows on a Samba share.
> Tried changing posix righ
I have some difficulties setting rights from Windows on a Samba share.
Tried changing posix rights to no avail. The Admin rights has disappeared
and i need to reset them at the share level. How do i do that when it is
not working from Windows. I do not understand samba-tool ntacl and how it
is supp
- Original Message -
> From: "chantal rosmuller"
> To: "Andrew Martin"
> Cc: samba@lists.samba.org
> Sent: Friday, March 1, 2013 1:46:02 AM
> Subject: Re: [Samba] problem with adding printers to samba4 [solved]
>
> On 02/28/2013 03:47 PM, Andrew
- Original Message -
> From: "Chantal Rosmuller"
> To: samba@lists.samba.org
> Sent: Thursday, February 28, 2013 7:53:44 AM
> Subject: Re: [Samba] problem with adding printers to samba4 [solved]
>
> I solved it myself, the rpm I installed was not compiled wi
I solved it myself, the rpm I installed was not compiled with cups support
On 02/27/2013 02:56 PM, Chantal Rosmuller wrote:
Hi,
I have a problem setting up shared printers in samba4, I used the
manual in
https://wiki.samba.org/index.php/Samba_AD_DC_HOWTO#Step_13:_Setup_a_Printer_share
-
Hi,
I have a problem setting up shared printers in samba4, I used the manual in
https://wiki.samba.org/index.php/Samba_AD_DC_HOWTO#Step_13:_Setup_a_Printer_share
- I added a printer using cups
- I added the printer en printer driver share as written in the wiki
- I logged on as samba 4 administ
I am installing smb 3.5 on a CentOS 6.2 host using smbldap-tools. I've
previously installed a similar configuration on RHEL4 using smb 3.0 but
CentOS now uses nss-pam-ldapd and nslcd instead of nss_ldap, so the
configurations cannot be moved straight across.
When I do a listing of a share directo
I am installing smb 3.5 on a CentOS 6.2 host using smbldap-tools. I've
previously installed a similar configuration on RHEL4 using smb 3.0 but
CentOS now uses nss-pam-ldapd and nslcd instead of nss_ldap, so the
configurations cannot be moved straight across.
When I do a listing of a share directo
Hi.
Current host OS: CentOS5.9
Current client OS: Windows XP (all the latest stuff)
Current Samba: 3.6.6-0.129.el5
Ever since 3.4 I am having problems with the "/usr/bin/profiles" binary, it
does NOT allow me to change a SID within a registry file.
However, using an older version of the binary (
On Wed, Jan 23, 2013 at 7:13 AM, Paolo Supino wrote:
> Hi Nico
>
> It's not up to me to decide (and implement) the OS updates :-( and
> thus cannot do anything about the status of security of the systems.
> Though I completely agree with you :-)
>
> Now to the Samba ADS integraztion problem. I onl
Hi Nico
It's not up to me to decide (and implement) the OS updates :-( and
thus cannot do anything about the status of security of the systems.
Though I completely agree with you :-)
Now to the Samba ADS integraztion problem. I only need to execute the
net ads command, I need the windows domain m
On Tue, Jan 22, 2013 at 6:44 AM, Paolo Supino wrote:
> Hi
>
> I'm trying to make a Linux server (RHEL 5.3) join my company's ADS
> domain. The company's domain is built from serveral kerberos realms
Stop *right* there. If you have RHEL, and you've been regularly
applying updates, you've automatic
Hi
I'm trying to make a Linux server (RHEL 5.3) join my company's ADS
domain. The company's domain is built from serveral kerberos realms
and Windows domain. the Linux FQDN resolves to the name of one of the
kerberos realms we have, but I was asked to to have the linux server
join a different kerb
On Fri, 2013-01-18 at 13:48 +0100, Daniel Hedblom wrote:
> 2013/1/18 Andrew Bartlett
>
> > On Fri, 2013-01-18 at 10:11 +0100, Daniel Hedblom wrote:
> > > Hi there,
> > >
> > > Im trying to join a samba 4.0.1 server to an older samba 4 alpha 17
> > server.
> > > Whatever i do the join is interrupt
2013/1/18 Andrew Bartlett
> On Fri, 2013-01-18 at 10:11 +0100, Daniel Hedblom wrote:
> > Hi there,
> >
> > Im trying to join a samba 4.0.1 server to an older samba 4 alpha 17
> server.
> > Whatever i do the join is interrupted but i dont know what goes wrong.
> Dns
> > is double checked and corre
On Fri, 2013-01-18 at 10:11 +0100, Daniel Hedblom wrote:
> Hi there,
>
> Im trying to join a samba 4.0.1 server to an older samba 4 alpha 17 server.
> Whatever i do the join is interrupted but i dont know what goes wrong. Dns
> is double checked and correct as is most other stuff. How can i get a
Hi there,
Im trying to join a samba 4.0.1 server to an older samba 4 alpha 17 server.
Whatever i do the join is interrupted but i dont know what goes wrong. Dns
is double checked and correct as is most other stuff. How can i get a
better view of what is happening than this? Can it be the source do
Hello,
I'm new to the list. I subscribed because there is a problem that
most do not get to look around:
Before I'm using roaming profiles with samba and had no problems. But
when activating local profiles (I did it puting the directives "logon
path", "logon home" and "logon drive" blank) pas
Lee,
I've experienced a similar problem - no active kdc. By adding to my smb.conf:
interfaces = YOUR_S4_IP
bind interfaces only = yes
And restarting the samba suite resulted in the kdc starting and listening (on
port 88)
I then needed to install heimdal 1.5.1 on my FreeBSD 9.1
On Mon, 2012-12-24 at 09:23 -0500, Lee Allen wrote:
> Hi. I am following the steps in the Samba4 HOWTO:
> http://wiki.samba.org/index.php/Samba4/HOWTO
> and I run into trouble at this step:
>
> [root@samba-ad ~]# kinit administra...@allenlan.net
> "kinit: Cannot contact any KDC for realm 'ALLENLA
At the beginning of the HOWTO there is a link to the OS Requirements page that
lists all of the packages that need to be installed before compiling Samba 4,
did you follow that part of the how to and install the prerequired software?
>>> Lee Allen 12/24/2012 7:23 AM >>>
Hi. I am following the
Hi. I am following the steps in the Samba4 HOWTO:
http://wiki.samba.org/index.php/Samba4/HOWTO
and I run into trouble at this step:
[root@samba-ad ~]# kinit administra...@allenlan.net
"kinit: Cannot contact any KDC for realm 'ALLENLAN.NET' while getting
initial credentials"
I performed all of th
I recompiled my Python installation, looks like I didn't use the
--enable-shared switch. Now I have a .so file and linking seems to be working
correctly. So far the Samba compile is running fine. Thanks!
F
> Subject: Re: [Samba] Problem compiling Samba4, Python installed in
>
On Fri, 2012-12-21 at 15:55 -0600, Flint Million wrote:
> Hi,I am working with a custom built (LFS-based) Linux distro and am
> attempting to compile Samba4.
> Samba3 has always compiled without issue.
> The system has its Python installed in /opt/python2. There are symlinks to
> put "python" in
Hi,I am working with a custom built (LFS-based) Linux distro and am attempting
to compile Samba4.
Samba3 has always compiled without issue.
The system has its Python installed in /opt/python2. There are symlinks to put
"python" in /usr/local/bin and the "python2.7" lib folder in /usr/include.
Th
On Thu, 2012-12-06 at 12:59 +0100, Hervé Hénoch wrote:
> Hello
>
> I've migrated a samba 3 server to a samba 4 (.all the tests mentioned in
> this howto are succesfull) .But i can't open a session with a
> workstation on samba4 domain : approbation problem. The workstation name
> which can't co
Am Sat, 08 Dec 2012 18:03:31 +0100 schrieb Börje Johnsson:
> Hi
>
> I have a problem when setting up samba4.
> The server is Ubuntu 12.04 and the version of samba is 4.0.0rc6. I use a
> clean install of samba.
built from git or installed with ubuntu packages?
> I think that samba is configured
I have a problem looking at a server's shares from either a linux or
windows computer. Both OS's give NT_STATUS_ACCESS_DENIED errors when
trying to browse the server (//192.168.1.11). However, both can view
the file share (//192,168.1.11/public) when entered directly into the
address bar. As
Hi
I have a problem when setting up samba4.
The server is Ubuntu 12.04 and the version of samba is 4.0.0rc6. I use a
clean install of samba.
I think that samba is configured correctly according to the HOWTO.
Samba is provisioned like this:
$ samba-tool domain provision --realm=hrm.local --domain=
Hello
I've migrated a samba 3 server to a samba 4 (.all the tests mentioned in
this howto are succesfull) .But i can't open a session with a
workstation on samba4 domain : approbation problem. The workstation name
which can't connect is "admin-pc"
Any idea ?
*Here are the logs of log.samba
*
On 1 windows 7 workstation in my work samba 3 domain roaming profiles
are not loading. The problem seems to be a failure in loading the
login.bat
Samba version 3.5.19
PID Username Group Machine
---
8078 jdrescher
Hi,
We are having some performances problems with users that have folders
shared over their internal networks.
We were wondering, when the user list files using dir *.dat or calls
FindFirstFile/FirstNextFile , is the filtering done on the local
machine or on the remote one?
Thanks in advance!
--
Never mind. User error. I'd forgotten to set the DHCP server to hand out
the WINS IP. :(
On 10/11/2012 08:44, Nick Howitt wrote:
Hi,
I've been running Samba 3.5.18 on ClearOS 5.2 for a while now. I have
a server on its own LAN's (192.168.2.0/24 and 192.168.3.0/24) and an
IPSec VPN through t
Hi,
I've been running Samba 3.5.18 on ClearOS 5.2 for a while now. I have a
server on its own LAN's (192.168.2.0/24 and 192.168.3.0/24) and an IPSec
VPN through to 192.168.10.0/24. The remote LAN is just one machine on
the other side of a router. I've been successfully seeing its netbios
name
Hi everybody,
I used to shutdown our workstation pools with the net rpc command.
Something like this:
net rpc SHUTDOWN -t 300 -f -C "Nice closing message" -W MYDOMAIN -U
WORKSTATION_NAME\\administrator%localadminpasswd -S 192.168.7.49
Could not connect to server 192.168.7.49
Connection faile
Hello,
I'm using Windows Server 2008 R2 and Debian Linux with Samba 3.6.7 and I
have problem with ACL permissions. When I set max protocol = SMB2 in
smb.conf I am able to traverse through folder "test" as "user1" even if I
set only read permission for "Others". If I set max protocol = NT1, I
canno
Hello,
Building samba-4.0.0rc1 on Solaris 10 update 9 with gcc 4.4.0 fails at:
[3516/3766] Linking default/lib/ntdb/ntdbtorture
Undefined first referenced
symbol in file
err default/lib/ntdb/tools/ntdbtorture_4.o
l
Hi,
We are using centos 6.2 and trying to mount cifs share on this server, but,
we getting a error *CIFS VFS: cifs_mount failed w/return code = -22. *
*
*
Kindly help us to get rid of it.
Thanks in advance.
regards,
J.Vijayan
--
To unsubscribe from this list go to the following URL and read the
Hi,
This problem is solved in our instance, but want to report it here because
I'm curious about the root cause, and also for others who may see it.
We have a Samba server (3.4.7) which is mounted by various Windows
workstations. It also, unrelated to that, has CIFS mounts of a half-dozen
other W
Hello,
I've been trying to build samba 4.0.0 beta7 on Solaris 10 without success.
I'm using gcc 4.4.0.
The problems I'm encountering are compilation errors where include files
are not being found:
[1177/3379] Compiling source4/ntvfs/posix/python/pyposix_eadb.c
../source4/ntvfs/posix/python/pypo
1 - 100 of 2869 matches
Mail list logo