Dear Brian,
i am very interesting, whether you've already solved your problem with
the delaing when opening a print (plot) dialog box in autocad, because
i have the same one. When you did, i'd like to ask you for the solution.
When you didn't , try unplug the network cable from the switch.
When you didn't , try unplug the network cable from the switch. After
them this delaying problem will not occur. It sounds like a madness,
butit works. Of course you can't print, but the dialog box opens
immediately. Where is then the problem?
You always have the posibility to setup
We use AutoCAD 2000, 2002, 2004 with RH E3.0 and Samba 3.0.2-6.3E with
no
delays in saving or printing and have achieved better performance than the
previous W2k server. With a little more information we might be able to
assist in finding the bottleneck.
Terry
AutoCad 2002 seems to work
writeable = Yes
guest ok = Yes
- Original Message -
From: Brian Merrell [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Tuesday, June 08, 2004 12:07 PM
Subject: Re: [Samba] Samba just Slow with AutoCad?
Terry, Thanks a lot for your reply. We're really trying to solve
PROTECTED]
Sent: Wednesday, June 09, 2004 7:56 AM
Subject: Re: [Samba] Samba just Slow with AutoCad?
Hi.
Does your new system use ReiserFS?
When these ~20 second delays happen, can you see if there's a spike of
System CPU time useage on the server?
I've not heard of it happening over a network
this problem
dissapeared.
Maybe this could be the same reason. just a thought.
-Ursprüngliche Nachricht-
Von: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Auftrag von
Brian Merrell
Gesendet: Mittwoch, 9. Juni 2004 17:09
An: [EMAIL PROTECTED]
Betreff: Re: [Samba] Samba just Slow with AutoCad
guess as to what the problem is.
- Original Message -
From: Brian Merrell [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Wednesday, June 09, 2004 9:09 AM
Subject: Re: [Samba] Samba just Slow with AutoCad?
Yes I am user reiserFS on the AutoCad Shares (Jerry, are you?)
The older machine
On Wed, Jun 09, 2004 at 10:18:22AM -0600, Brian Merrell wrote:
I tried timing the time it takes to save. It takes the older machine
about
1.25 seconds
to save a 606KB drawing and it takes ~3 seconds for the new fancy
machine.
Could this be due to ReiserFS?
In my experience, and
: Jeremy Allison [EMAIL PROTECTED]
To: Brian Merrell [EMAIL PROTECTED]
Cc: [EMAIL PROTECTED]
Sent: Monday, June 07, 2004 4:33 PM
Subject: Re: [Samba] Samba just Slow with AutoCad?
On Mon, Jun 07, 2004 at 08:59:34AM -0600, Brian Merrell wrote:
Here are some smb.conf's I have tried:
(I have
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Brian Merrell wrote:
| No good. It's still amazingly slow. It seems to perform
| just fine until the user tries to print. There is a huge
| delay before the print dialog comes up, and when the user
| tries to save there is another huge delay. The
|
:27 AM
Subject: Re: [Samba] Samba just Slow with AutoCad?
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Brian Merrell wrote:
| No good. It's still amazingly slow. It seems to perform
| just fine until the user tries to print. There is a huge
| delay before the print dialog comes up
and really don't want to go back to windows.
brian.
- Original Message -
From: Gerald (Jerry) Carter [EMAIL PROTECTED]
To: Brian Merrell [EMAIL PROTECTED]
Cc: [EMAIL PROTECTED]
Sent: Tuesday, June 08, 2004 8:27 AM
Subject: Re: [Samba] Samba just Slow with AutoCad?
-BEGIN PGP
: [Samba] Samba just Slow with AutoCad?
Do you have any dns service running? Even if you're running some files
based stuff (/etc/hosts) make sure that your address match names. I've
had issues where they didn't match up before.
Follow me here... a machine running dhcp registered itself in dns
Professional on these settings)
Restart and try your printers again.
Bob
-Original Message-
From: Brian Merrell [mailto:[EMAIL PROTECTED]
Sent: Tuesday, June 08, 2004 9:50 AM
To: [EMAIL PROTECTED]
Subject: Re: [Samba] Samba just Slow with AutoCad?
Thanks for your response Jerry.
Yes
]
Subject: RE: [Samba] Samba just Slow with AutoCad?
Brian
I might suggest a couple of setting changes on your XP machines:
1) Open services and stop/disable Web Client
2) Open windows explorer, go to toolsfolder options, click the View tab,
and uncheck the Automatically search for network folders
Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On
Behalf
Of Bob Turner
Sent: Tuesday, June 08, 2004 10:45 AM
To: 'Brian Merrell'; [EMAIL PROTECTED]
Subject: RE: [Samba] Samba just Slow with AutoCad?
Brian
I might suggest a couple of setting changes on your XP machines:
1
Make sure your network doesn't have any problems with mismatched duplex
settings, excessive collisions, etc. I had this problem once and it
crippled anything that tried to copy a large file to the server. It showed
up worst with AutoCAD because it generated the most network traffic.
--
To
Hello,
I had that problem, too.
The reason therefor were bad rights on the printer.
That solved the problem for us.
Maybe that can helpyou.
MfG Stefan
--
To unsubscribe from this list go to the following URL and read the
instructions: http://lists.samba.org/mailman/listinfo/samba
This is from 1998:
We've had serious performance problems loading AutoCAD R14 .dwg files from
a
VAResearch VArServer 3000 (dual 400MHz PII, Red Hat 5.0, SAMBA 1.9.17p4,
256MB RAM, 36GB RAID5). The problem is that on first access, trying to read
the .dwg file is very, very slow
This is from 1999:
I would try turning off the Strict sync option. I would also test it with the
oplock
options disabled as well.
On Mon, 7 Jun 2004 08:59:34 -0600, Brian Merrell wrote:
This is from 1998:
We've had serious performance problems loading AutoCAD R14 .dwg files from
a
VAResearch VArServer 3000
browseable = Yes
read only = No
guest ok = No
comment = adobe related files
valid users = drafter
- Original Message -
From: John Mazza [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Monday, June 07, 2004 9:05 AM
Subject: Re: [Samba] Samba just Slow with AutoCad?
I would try turning off
-
From: John Mazza [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Monday, June 07, 2004 9:05 AM
Subject: Re: [Samba] Samba just Slow with AutoCad?
I would try turning off the Strict sync option. I would also test it
with the oplock
options disabled as well.
On Mon, 7 Jun 2004 08:59:34 -0600
On Mon, Jun 07, 2004 at 08:59:34AM -0600, Brian Merrell wrote:
Here are some smb.conf's I have tried:
(I have tried SO_SNDBUF=8192, and 4096)
Remove these two parameters.
read prediction = true
strict sync = yes
Hope this helps,
Jeremy.
--
To unsubscribe from this list go to the
23 matches
Mail list logo