When you didn't , try unplug the network cable from the switch. After
them this "delaying" problem will not occur. It sounds like a madness,
butit works. Of course you can't print, but the dialog box opens
immediately. Where is then the problem?
You always have the posibility to setup
> We use AutoCAD 2000, 2002, & 2004 with RH E3.0 and Samba 3.0.2-6.3E with
no
> delays in saving or printing and have achieved better performance than the
> previous W2k server. With a little more information we might be able to
> assist in finding the bottleneck.
>
> Terry
>
AutoCad 2002 seems t
On Wed, Jun 09, 2004 at 10:18:22AM -0600, Brian Merrell wrote:
> >
> > I tried timing the time it takes to save. It takes the older machine
> about
> > 1.25 seconds
> > to save a 606KB drawing and it takes ~3 seconds for the new "fancy"
> machine.
> >
> > Could this be due to ReiserFS?
> >
In my
best guess as to what the problem is.
- Original Message -
From: "Brian Merrell" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Wednesday, June 09, 2004 9:09 AM
Subject: Re: [Samba] Samba just Slow with AutoCad?
> Yes I am user reiserFS on the AutoCad Shares
rian Merrell" <[EMAIL PROTECTED]>
Cc: <[EMAIL PROTECTED]>
Sent: Wednesday, June 09, 2004 7:56 AM
Subject: Re: [Samba] Samba just Slow with AutoCad?
> Hi.
>
> Does your new system use ReiserFS?
>
> When these ~20 second delays happen, can you see if there's a
d machine is very very basic:
>
> [global]
>
> workgroup = TRISTATE
> security = SHARE
>
> [backup]
>
> path = /usr/backup
> writeable = Yes
> guest ok = Yes
>
>
>
>
> ----- Original Message -----
> From: "Brian Merrell" <[EMAIL
Make sure your network doesn't have any problems with mismatched duplex
settings, excessive collisions, etc. I had this problem once and it
crippled anything that tried to copy a large file to the server. It showed
up worst with AutoCAD because it generated the most network traffic.
--
To unsubs
t;
Sent: Tuesday, June 08, 2004 12:07 PM
Subject: Re: [Samba] Samba just Slow with AutoCad?
> Terry, Thanks a lot for your reply. We're really trying to solve this
> problem.
>
>
> > Brian,
> >
> >
> > 1. Which release of AutoCAD are you using?
>
&g
d better performance than the
> previous W2k server. With a little more information we might be able to
> assist in finding the bottleneck.
>
> Terry
>
> -Original Message-
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] On
Behalf
> Of Bob Turner
> Sent: Tuesda
an Merrell'; [EMAIL PROTECTED]
Subject: RE: [Samba] Samba just Slow with AutoCad?
Brian
I might suggest a couple of setting changes on your XP machines:
1) Open services and stop/disable Web Client
2) Open windows explorer, go to tools>folder options, click the View tab,
and uncheck the &quo
ssuming Windows XP Professional on these settings)
Restart and try your printers again.
Bob
-Original Message-
From: Brian Merrell [mailto:[EMAIL PROTECTED]
Sent: Tuesday, June 08, 2004 9:50 AM
To: [EMAIL PROTECTED]
Subject: Re: [Samba] Samba just Slow with AutoCad?
Thanks for your response J
D]>
Sent: Tuesday, June 08, 2004 8:59 AM
Subject: Re: [Samba] Samba just Slow with AutoCad?
> Do you have any dns service running? Even if you're running some files
> based stuff (/etc/hosts) make sure that your address match names. I've
> had issues where they didn't match
hine with a heavier load.
I'm all out of ideas and really don't want to go back to windows.
brian.
- Original Message -
From: "Gerald (Jerry) Carter" <[EMAIL PROTECTED]>
To: "Brian Merrell" <[EMAIL PROTECTED]>
Cc: <[EMAIL PROTECTED]>
PROTECTED]>
Cc: <[EMAIL PROTECTED]>
Sent: Tuesday, June 08, 2004 8:27 AM
Subject: Re: [Samba] Samba just Slow with AutoCad?
> -BEGIN PGP SIGNED MESSAGE-
> Hash: SHA1
>
> Brian Merrell wrote:
> | No good. It's still amazingly slow. It seems to perform
> | jus
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Brian Merrell wrote:
| No good. It's still amazingly slow. It seems to perform
| just fine until the user tries to print. There is a huge
| delay before the print dialog comes up, and when the user
| tries to save there is another huge delay. The
|
From: "Jeremy Allison" <[EMAIL PROTECTED]>
To: "Brian Merrell" <[EMAIL PROTECTED]>
Cc: <[EMAIL PROTECTED]>
Sent: Monday, June 07, 2004 4:33 PM
Subject: Re: [Samba] Samba just Slow with AutoCad?
> On Mon, Jun 07, 2004 at 08:59:34AM -0600, Brian Merrell wrote:
On Mon, Jun 07, 2004 at 08:59:34AM -0600, Brian Merrell wrote:
>
> Here are some smb.conf's I have tried:
> (I have tried SO_SNDBUF=8192, and 4096)
Remove these two parameters.
> read prediction = true
> strict sync = yes
Hope this helps,
Jeremy.
--
To unsubscribe from this list go to
ssage -
From: "John Mazza" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Monday, June 07, 2004 9:05 AM
Subject: Re: [Samba] Samba just Slow with AutoCad?
> I would try turning off the "Strict sync" option. I would also test it
with the oplock
> options disab
alid users = drafter
>
>[Topowork]
>
>path = /fileservice/topowork
>writeable = Yes
>browseable = Yes
>read only = No
>guest ok = No
>comment = adobe related files
>valid users = drafter
- Original Message -
From: "John Mazza" <[EMAIL PROTECTED]&g
I would try turning off the "Strict sync" option. I would also test it with the
oplock
options disabled as well.
On Mon, 7 Jun 2004 08:59:34 -0600, Brian Merrell wrote:
>This is from 1998:
>
>"We've had serious performance problems loading AutoCAD R14 .dwg files from
>a
>VAResearch VArServer
20 matches
Mail list logo