OK guys, After beating my head I got it to work !! I setup a new test machine with redhat 8.0 and used the stock samba in it 2.25-10 build.
This seems to work like a charm and I was able to go through with it with out a problem. Go figure why the compiled version 2.27a just didn't want to work? Anyways I found a doc off of the Linuxtoday.com site that some girl named Carla put together. I will take her text and make a new step by step manual for everyone based on my experience. Thanks for everyones help. Raj -----Original Message----- From: mark [mailto:[EMAIL PROTECTED]] Sent: Tuesday, February 11, 2003 12:51 AM To: Raj Saxena; [EMAIL PROTECTED] Subject: Re: [Samba] pdc help needed with win2k sp3 clients/samba 2.27a/redhat 8.0 On Tuesday 11 February 2003 07:52, Raj Saxena wrote: > Does anyone have any good docs as to what clients work and with what > service pack? I know some guys have had luck with debian, and win2ksp3. We > have 17 clients in one building and then I would need to bring up two bdc > (samba servers) if possible for the remote locations. > It sounds like you've done your homework, but this is quite a good document in case you haven't seen it. http://hr.uoregon.edu/davidrl/samba/samba-pdc.html#pdc I know it's possible to connect a w2k machine to a samba pdc as I've done it. Which is not to say anything about you, but just to confirm that it is actually possible. Good luck, mark --- Incoming mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.449 / Virus Database: 251 - Release Date: 1/27/2003 --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.449 / Virus Database: 251 - Release Date: 1/27/2003 -- To unsubscribe from this list go to the following URL and read the instructions: http://lists.samba.org/mailman/listinfo/samba