Hi,
This does the job! :-)
On Thu, 4 Apr 2002, Henning Meier-Geinitz wrote:
> You could try the following: Look into backend/mustek.c and search for
> the following code:
>
> static SANE_Status
> dev_wait_ready (Mustek_Scanner *s)
> {
> if (s->hw->flags & MUSTEK_FLAG_N)
> r
abel deuring wrote:
> "Patrick S. Leung" wrote:
>
>>Hi Erik,
>>
>>I retired using your recommendation and it doesn't help much. Looks
>>like the SANEI_DEBUG_SANEI_SCSI doesn't produces much output, but I do
>>see some low level in /var/log/message ( I did a tail -f
>>/var/log/message before I sta
> > Hi!
> >
> > I got a vista-s6e an is trying to connect it to a aha-2940u2w card with
> > out any luck. According to information on card setup it should work
> > www.mrichter.com/cdr/files/68_50_n.htm (figure D) High=ON Low=OFF.
> > But when I connect the cable nothing is found, not even my HD a
ZekeVarg wrote:
>
> Hi!
>
> I got a vista-s6e an is trying to connect it to a aha-2940u2w card with
> out any luck. According to information on card setup it should work
> www.mrichter.com/cdr/files/68_50_n.htm (figure D) High=ON Low=OFF.
> But when I connect the cable nothing is found, not even
"Patrick S. Leung" wrote:
>
> Hi Erik,
>
> I retired using your recommendation and it doesn't help much. Looks
> like the SANEI_DEBUG_SANEI_SCSI doesn't produces much output, but I do
> see some low level in /var/log/message ( I did a tail -f
> /var/log/message before I start sane):
>
> Apr 5 1
...try stthd0.pc.uni-koeln.de instead :-)
^
|
Hi again,
I'm sure that the backend is well designed and will do its job.
But the prob is, that the Plustek backend already has a lot of
hooks and possibilities to control LM983x based devices as well.
The EPSON 1250 is already included also the HP2200C/2100C and reported
as working - so why doing
Hi,
Agreed, one backend should be enough for all lm9832-scanners. During the
development of this backend I did look at other backends. I worked
partly together with the people at sourceforge. The problem was that
their driver was swapped with unused code and ancient relics of other
scanners. Secon
Hi Erik,
I retired using your recommendation and it doesn't help much. Looks
like the SANEI_DEBUG_SANEI_SCSI doesn't produces much output, but I do
see some low level in /var/log/message ( I did a tail -f
/var/log/message before I start sane):
Apr 5 13:23:49 localhost kernel: __alloc_pages:
Wow another attempt to make LM983x based devices work ;-)
I'm a little bit confused about this, as I thought that
there are still three or four other similar backends:
HP2200C on sourceforge (also EPSON1250)
two attempts for CANON (CANON N650U and 670)
Plustek backend (for all Plustek LM9831/2, HP2
Hi everybody,
I like to announce the release of a backend for the HP2200C scanjet.
This scanner is equiped with a LM9832-scanner-on-a-chip. This chip is
also part of the Epson 1250 and verious canon scanners. The backend is
developed for the HP, but at this moment work is being done at porting
>
> Hi,
>
> On Thu, Apr 04, 2002 at 09:09:12AM +0200, Ulrich Deiters wrote:
> > The Canon-SCSI backend 1.0.9 (available via anonymous ftp from
> > stthd0.pc.uni-koeln.de) supports the FB1200S.
>
> Is this code intended to be included into SANE CVS? Does it supersede
> the current canon backend?
Hi all,
I have the Astra 2400S scanning using the flatbed source but when I use the
Automatic Document Feeder the image I get is blank.
I am using the following options:
Scanimage --device umax:/dev/sg0 --source Automatic Document Feeder
--format=tiff --mode Gray -l 0 -t 0 -x 215.9 -y 279.4 >
/h
Hi!
I got a vista-s6e an is trying to connect it to a aha-2940u2w card with
out any luck. According to information on card setup it should work
www.mrichter.com/cdr/files/68_50_n.htm (figure D) High=ON Low=OFF.
But when I connect the cable nothing is found, not even my HD and
CD-roms.
Anyone who
Hello everyone,
Recently I have obtained a used Microtek Scanmaker-III SCSI scanner and
I'm in the process of building and installing all the software needed to
do useful work with it. 8-)
Anyway, I've built and installed version 1.2.10 of both glib and gtk+, so
that part is taken care of. The JP
15 matches
Mail list logo
