Oi,
I have freshly compiled and installed SANE 1.0.10 final. I have also
rebuilt XSane 0.90 against the current SANE. The scanner I used for the
test id the Epson Perfection 1260 Photo with the TPA connected. The
config files /etc/sane.d/dll.conf and /etc/sane.d/plustek.conf are the
ones as th
Hi,
On Sat, Feb 01, 2003 at 10:34:30PM +0100, Till Kamppeter wrote:
> Are these fixes in SANE 1.0.10 or have I to update the "plustek" backend
> from your site (I make RPMs for SANE 1.0.10 for Mandrake currently).
Gerhard asked me if this Change can go into CVS before release and it
did. So the
Hi,
On Sun, Jan 12, 2003 at 11:17:37PM +0100, Aurelien Jarno wrote:
> > A bit too late for 1.0.10 but after that we can include the patch.
I've added a patch based on your code to CVS now.
> I modified my patch using your advices, it should be better.
Two more changes: I check if the option typ
Hi,
On Sun, Jan 12, 2003 at 09:37:51PM +0100, Julien BLACHE wrote:
> A couple of people have asked for the xscanimage menu entries in GIMP
> to be moved to File/Acquire, along with XSane's ones.
>
> Here are two patches :
> - for xscanimage, move the entries to File/Acquire/xscanimage/*
That's
--QTprm0S8XgL7H0Dt
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
Content-Transfer-Encoding: quoted-printable
The Perfection 2450 and the new 3200 are pretty good for scanning
negatives and slides. I actually prefer the scans from my 2450 to
the ones from my Canon FS4000. E
k...@khk.net said:
> Especially if you have mid and large format slides or negatives,
> using a flatbed is a much more cost effictive solution, for large
> format you may not even be able to find a dedicated film scanner
> (that is as long as we are not talking about drum scanners).
Minolta Scan
Hi Till,
On Samstag, 1. Februar 2003 22:34, Till Kamppeter wrote:
> Are these fixes in SANE 1.0.10 or have I to update the "plustek" backend
> from your site (I make RPMs for SANE 1.0.10 for Mandrake currently).
fixed in 1.0.10!!
>
> Please answer to the list and in addition to me (to overcome t
Hi Till,
I've checked this here with my OpticPro UT16 (it also has a TPA).
I'm not sure where this comes from. I assume a problem in xsane, as
the feature works correctly using xscanimage and quiteinsane.
On Sonntag, 2. Februar 2003 00:23, Till Kamppeter wrote:
[SNIPSNAP]
> I have set SANE_DEBUG_
Hi list,
after checking the unsupported.desc, I'm a little bit confused about the
Visioneer 4400. I got a report, that it has the following VID/PID:
vendor ID 0x0461, product ID 0x0347
This one is exactly the PrimaScan 2600u.
Steven Ellis reports this device as LM983x one
http://homepages.paradis
Hi!
I'm writing concerning this post...=20
http://www.mostang.com/pipermail/sane-devel/2002-October/015796.html.
I had the exact same problem; I've scanned successfully with scanimage an=
d=20
xsane, then I didn't use the scanner for a couple of days. When I wanted =
to=20
scan again I simply got
Hi,
due to the commitment of Franz Bakan, the hp-backend V1.02 now has
support for OS/2. hp-backend V1.02 is available in CVS.
--Peter
--
Peter Kirchgessner
http://www.kirchgessner.net
mailto:pe...@kirchgessner.net
Hi Yago,
just remove the sane packages themselves, then remove the 2 packages listed=
=20
below.
> libsane1-1.0.9-3.1mdk
> libsane-devel-1.0.9-3.1mdk
You may need to use the --nodeps switch to get them to remove.
Some functionality may be lost during this deinstallation, however, once=20
the so
I apologize for asking again but i dont understand what is all beeing
said about hp2200c and sane backend .
(My english's so poor)
If I understand well , at this time , all is fixed in 1.0.10 if i also
download and install the last plustek driver. Am i right?
If i'm wrong ... what should i understa
Hi,
On Mon, Feb 03, 2003 at 04:18:41PM +0100, Yago wrote:
> Hi to all. I have an HP 4300c USB scanner and I know this scanner don't have
> Linux support,
Well, the kernel scanner driver does detect the scanner. So from the
kernel's point of view, it is supported.
> also no SANE support.
There
You don't need to remove anything as I have already included the NIASH
support into the Mandrake packages of SANE beginning from version 1.0.9.
DO NOT run scannerdrake. Add a line containing only "niash" to your
/etc/sanbe.d/dll.conf and you are ready to scan. Simply start the
scanning program
Yago wrote:
>Hi to all. I have an HP 4300c USB scanner and I know this scanner don't have
>Linux support, also no SANE support.
>
>Through the SANE Home Page links now I know that I need the "SANE backends for
>flatbed scanners with the NIASH chipset" for to work with my scanner. The
>installat
--_=_=_=IMA.BOUNDARY.H9PRAQ138764=_=_=_
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit
On Sat, 1 Feb 2003 19:31:19 +0100, Oliver Rauch wrote:
>sane-1.0.10 has been released.
Hi,
1.
As I have to convert UTF-8 back to something else on OS/2
because gdk/gtk here doe
17 matches
Mail list logo