Hello Henning,
In your previous message you said:-
>Scanner - Epson Perfection 1250. Do you use the plustek or
>Epson Kowa backend?
I am using the plustek backend.
>What's the difference between you xsane and xscanimage installations?
>Did you install one of them from source and the other from
Hi all folks,
KDE desktop
Each time when I prepare to scan documents as 'user' I have to execute
following commands on Konsole window
# su
# password
# chmod -c 0777 /dev/sg1
mode of `/dev/sg1' changed to 0777 (rwxrwxrwx)
# /sbin/insmod aha152x aha152x=0x140,9,7,0
Would it be possible to creat
> KDE desktop
The important thing here is the underlying operating system, I assume
you are using Linux.
> # chmod -c 0777 /dev/sg1
Do you have to do this every single time? BTW, 0777 is misleading
(though it will work), 0666 is correct. (Though it's probably a good
idea to create a new group fo
Hi,
I am trying to develop a driver for my scanner and am at the point where I need
to do some traffic sniffing on the parallel port. I am trying to do this
through wine.
Any ideas as to what the following messages mean?
fixme:file:DEVICE_Open Unknown/unsupported VxD AV260D.VXD. Try setting
On Sun, Mar 02, 2003 at 12:29:34AM -0800, Jason wrote:
>
> Hi,
>
> I am trying to develop a driver for my scanner and am at the point where I
> need to do some traffic sniffing on the parallel port. I am trying to do
> this through wine.
>
> Any ideas as to what the following messages mean?
>
Hi,
On Sun, Mar 02, 2003 at 08:56:35AM +0530, ionm...@indiainfo.com wrote:
> Hello Henning,
>
> In your previous message you said:-
>
> >Scanner - Epson Perfection 1250. Do you use the plustek or
> >Epson Kowa backend?
>
> I am using the plustek backend.
Then it's either a plustek backend or x
Hi Andras,
Thanks for your response
OS RH7.3
KDE desktop
Major A wrote:
> Do you have to do this every single time? BTW, 0777 is misleading
> (though it will work), 0666 is correct. (Though it's probably a good
> idea to create a new group for the scanner and/or run saned if you
> have oth
On Sunday 02 March 2003 01:35 am, you struggled free to say:
-- Steve Nordquist
> I suspect you're running into desiderata concerning how your
> modules were compiled, and perhaps a bit of data the chipset's
> contributing during bus enum.
Oops! Correction! You have no error, only warnings,
Hi,
On Sun, Mar 02, 2003 at 06:12:55PM +0800, Stephen Liu wrote:
[setting up permissions for /dev/sg*]
> 1) Yes, I have to do it every single time after login, logout and
> relogin. It is not convenient. Any solution?
That's done by your distribution. I guess it's done with PAM. Check
your dist
Hi,
there's indeed a problem with the colors on the 1250 with the Plustek
backend ;-( - we're working on that...
Gerhard
On Sonntag, 2. März 2003 04:26, ionm...@indiainfo.com wrote:
> Hello Henning,
>
> In your previous message you said:-
>
> >Scanner - Epson Perfection 1250. Do you use the plu
Hi all folks,
OS RH7.3
KDE
Xsane
I have a file of 10 pages scanned. Each page becomes a .jpg image. How
to combined them as a book.
On Win I just scan each page of the file, stacking them together on a
desktop/platform (such as PageKeep, PaperPort, etc.) to become a
complete file and then
Hi,
On Sun, Mar 02, 2003 at 11:51:30PM +0800, Stephen Liu wrote:
> I have a file of 10 pages scanned. Each page becomes a .jpg image. How
> to combined them as a book.
>
> On Win I just scan each page of the file, stacking them together on a
> desktop/platform (such as PageKeep, PaperPort, et
The preselection of a scanarea should not effect anything like this.
Does this happen for all available scanareas?
Please select a scanarea by hand after you selected a scanarea in the men=
u.
Oliver
On Saturday 01 March 2003 21:38, Klaus Dahlke wrote:
> Hi all,
>
> I have an Umax Astra 2200 SU
Hope these comments will also help:
It is relevant here whether one is using devfs or not. If one is using
devfs, then the devices /dev/sg* do not exist, unless and until the sg
module gets loaded. In any event, if these files are created when the
machine gets booted up (presumes that the module g
14 matches
Mail list logo