Hi all !
About the OpticFilm 7200 (see my previous message), I have some more info...
First, let me just paste the related content of my /proc/bus/usb/devices :
/proc/bus/usb/devices--
T: Bus=04 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 2
I have a HP 6350 scanner with ADF. I am running sane sane-1.0.17-0.pm.0
on a SuSE 9.1 system.
When I use batch mode the ADF does not signal when it is out of paper.
Is the HP6350 ADF capable of signaling the out of paper condition ?
What are the steps to debug the code if the scanner is capable
I have just bought a OptikPro 9636P+ from a charity shop -- no proof that it
works except that the light comes on, but no particular reason to think it
doesn't work.
I have built the pt_drv module (after a couple of minor hacks to get it to
compile with gcc-4), but when I try to load it, the
In the message I posted a couple of hours ago about my plustek machine I
mistakenly said I compiled pt_drv with gcc-4. This was a big fat lie because
I actually use gcc-3.4.5. (which has a 4 in it, which is where I got mixed
up).
Thanks to Mick for so persuasively making me aware of my error.
Hello,
i decided to have a look what might be needed to get my MD 90070 running with
sane. But i'm stuck at the very first steps.
according to http://www.meier-geinitz.de/sane/misc/develop.html i followed the
link of USB Snoopy which gave me sniffusb-0.13.zip in the end. Also i
downloaded
Jean-Baka Domelevo schrieb:
[...]
Okay, I don't like the question mark after the name of the chip. On
the sane-project webpage listing the unsupported devices, it is said
probably a GL841, based upon a trial by sane-find-scanner, probably.
To make sure, the first thing I did after unpacking my
On 1/28/06, Pierre Willenbrock pie...@pirsoft.dnsalias.org wrote:
gl841 and gl842 are identical from the driver side. The genesys backend
works for my scanner which is a gl842 based Canon LiDE 35.
Hi Pierre,
I've downloaded the genesys files from the CVS, and I've seen you're
the main
Thanks to a pointer from Henning Meier-Geinitz and SANE_DEBUG_DLL,
I now have sane built and the net backend working find under Cygwin.
This required another patch.
Henning, I apologise for responding directly to you on Thursday and
not to the list. I'd like to blame MS Outlook, but it was most
Jean-Baka Domelevo schrieb:
On 1/28/06, Pierre Willenbrock pie...@pirsoft.dnsalias.org wrote:
gl841 and gl842 are identical from the driver side. The genesys backend
works for my scanner which is a gl842 based Canon LiDE 35.
Hi Pierre,
I've downloaded the genesys files from the CVS, and
Hello
xsane-win32-0.991 has been released and can be downloaded from
http://www.xsane.org
Best regards
Oliver
10 matches
Mail list logo
