On Feb 12, 2008 6:14 AM, m. allan noah kitno455 at gmail.com wrote:
Gernot- does the windows driver allow independent resolution controls?
what are you going to do with the stretched image that will result?
Maybe I misunderstood the issue: the MP710 and others have resolutions
of 1200x2400 (or
Hi,
I've made some progress ...
I changed :
/* CANOLIDE35 */
{1200,
/*TODO: find a good reason for keeping all three following variables*/
87,/*(black) */
87,/* (dummy) */
0,/* (startxoffset) */
10400,/*sensor_pixels */
sane at tsleg.com a ?crit :
Where do I set this ? (which parameter of which struct ?)
Sorry ... I found where to set this.
cgi-mailer at kundenserver.de writes:
2. Manufacturer (e.g. Mustek):
'Epson Stylus DX 4050'
Treat as if it's a DX4000 and all should be well.
The DX4000 is listed in epkowa.desc, status: good.
3. Model name (e.g. ScanExpress 1200UB):
'All in One'
4. Bus type:
'USB'
5. Vendor id
On Monday, 11. February 2008, Pierre Willenbrock wrote:
Did someone post the bcdDevice value of a LiDE 80? GL841 goes up to
3.0.5, as someone said, and GL842 begins with 3.0.6
bcdDevice of mine is 0302.
Reinhard
On Tuesday 12 February 2008 03:41:49 Reinhard Biegel wrote:
On Monday, 11. February 2008, Pierre Willenbrock wrote:
Did someone post the bcdDevice value of a LiDE 80? GL841 goes up to
3.0.5, as someone said, and GL842 begins with 3.0.6
that was me. But it's not quite clear. got also some
Hello,
I inverted colors with gimp. Sorry I forget this operation.
Selon postmaster postmaster at tsleg.com:
Hi,
How did you get this one :
http://ggastebois.free.fr/lide90_snoop/toto_10_0_0_comment.jpg ??
Colors are not inverted ...
Guillaume Gastebois a ?crit :
Hello,
I
Gerhard Jaeger schrieb:
On Tuesday 12 February 2008 03:41:49 Reinhard Biegel wrote:
On Monday, 11. February 2008, Pierre Willenbrock wrote:
Did someone post the bcdDevice value of a LiDE 80? GL841 goes up to
3.0.5, as someone said, and GL842 begins with 3.0.6
that was me. But it's not quite
On Monday 11 February 2008, Pierre Willenbrock wrote:
Reinhard Biegel schrieb:
Am Monday, 11. February 2008 schrieb Stefan Lucke:
At that moment, I guess you'll see messages like:
new high speed USB device using ehci_hcd and address nn
via dmesg.
Hi,
Yes, thats right.
On Tuesday 12 February 2008 10:24:51 Pierre Willenbrock wrote:
Gerhard Jaeger schrieb:
On Tuesday 12 February 2008 03:41:49 Reinhard Biegel wrote:
On Monday, 11. February 2008, Pierre Willenbrock wrote:
Did someone post the bcdDevice value of a LiDE 80? GL841 goes up to
3.0.5, as someone
The Epson 4490 is not listed on
http://www.sane-project.org/sane-mfgs.html#Z-EPSON
Surfing around i see people have asked about support, there are cases where it
does NOT work with out-of-the-box distribs/kooka, but i am not seeing
definitive answers of whether it does or doesn't
Does anyone
===
== Neuer Eintrag
===
---
-- Formular: 'adddev'
---
1. Your email address:
'qpadla at gmail.com'
2. Manufacturer (e.g.
===
== Neuer Eintrag
===
---
-- Formular: 'adddev'
---
1. Your email address:
'rimvydas.lauzikas at kf.vu.lt'
2.
El Tuesday 12 February 2008 18:53:19 cgi-mailer at kundenserver.de escribi?:
===
== Neuer Eintrag
===
---
-- Formular: 'adddev'
On Tuesday 12 February 2008 20:18:03 JKD wrote:
El Tuesday 12 February 2008 18:53:19 cgi-mailer at kundenserver.de escribi?:
===
== Neuer Eintrag
===
---
--
Guillaume Gastebois schrieb:
Hello,
I modified registers 10-1d with :
{0x04, 0xd3, 0x04, 0xd3, 0x02, 0xa3, 0x20, 0x06, 0x00, 0xff, 0x24, 0x00,
0x00, 0x04},
and now the led is really white (red green and blue by moving eyes).
Led calibration seems to be good.
But calibration is
Hello,
I see that reg[2] was like 0x07. So INVOP was still set !!!
I comment out offset_calibration in genesys_flatbed_calibration, set
reg[2] to 0x03, and I get a black image with a gray vertical line in the
middle !!!
I try to reenable offset_calibration and I get :
Guillaume Gastebois schrieb:
Hello,
I see that reg[2] was like 0x07. So INVOP was still set !!!
I comment out offset_calibration in genesys_flatbed_calibration, set
reg[2] to 0x03, and I get a black image with a gray vertical line in the
middle !!!
I try to reenable offset_calibration
18 matches
Mail list logo