[sane-devel] Canon MP810

Hi everybody, I have a problem with Canon MP810. That's what scanimage-L says: scanimage -L [pixma] udp_command: no data received (recv): Connection refused[pixma] udp_command: no data received (recv): Connection refused[pixma] udp_command: no data received (recv): Connection

[sane-devel] Epson DX-4400

Hi , I'm trying to get Epson DX-4400 working on my sane scanner-server. But it gets not found by scanimage -L. sane-find-scanner returns: found USB scanner (vendor=0x04b8 [Language Error], product=0x083f [Language Error]) at libusb:001:002 What do the Language Errors mean? Is there some

[sane-devel] Unknown SANE status code -1081075667

Hi at all, I've got the following error trying to scan with my Epson Stylus Photo RX640 over XSane. [sanei_debug] Setting debug level of epson2 to 128. [epson2] sane_epson2_init: sane-backends 1.0.19 [epson2] sane_epson2_init: reading config file, epson2.conf [epson2] scsi EPSON

[sane-devel] Unknown SANE status code -1081075667

Hi at all, I've got the following (see the attached logfile) error trying to scan with my Epson Stylus Photo RX640 over XSane. Simple scanimage from server mashine and client PC works. Any ideas. Regards Oliver -Urspr?ngliche Nachricht- Von: carterbueford at gmx.net

[sane-devel] Unknown SANE status code -1081075667

Hi, easy, open a terminal window on the scanning client, and run the command i gave you. Does not work. I am using Windows XP and after executing the command, the log is empty. Command I used: C:\sane\binxsane 2net.log SANE_DEBUG_NET=10 Where do I have to execute this command? It only works on

[sane-devel] Unknown SANE status code -1081075667

Hi, @allan: I do not run xsane on the same mashine like the sane-server, so I do not understand how to write the log you want me to. xsane... 2net.log sanimage on the mashine where the sane-server runs, works fine. @Olaf:Compile the backend with gcc -Wall -Werror should give a cluebat. What is

[sane-devel] Unknown SANE status code -1081075667

Hi, thanks for the reply. Not initialising the status variable before returning it, most likely. Meaning that this is probably a minor bug in the epson2 backend. How can I solve this? Regards Oliver -Urspr?ngliche Nachricht- Von: Olaf Meeuwissen [mailto:olaf.meeuwissen at avasys.jp]

[sane-devel] Unknown SANE status code -1081075667

Hi, could anybody mention what is the reason for this?? Sane: scanimage -L WARNING: Unhandled message: interface=org.freedesktop.DBus.Introspectable, path=/, member=Introspect device `net:192.168.1.1:epson2:libusb:003:003' is a Epson generic flatbed scanner XSane: Unknown SANE status code

[sane-devel] Unsupported devices

Hi, yeah, I'll give it a try with the Xerox-mfp. But what about the hplib, anybody any idea? I can compile it on my mashine, but which binary do I need? Thanks so far Oliver -Urspr?ngliche Nachricht- Von: sane-devel-bounces+carterbueford=gmx.net at lists.alioth.debian.org

[sane-devel] Unsupported devices

Hi, I found a ipkg-package of hplip. I'll give it a try. Regards Oliver -Urspr?ngliche Nachricht- Von: sane-devel-bounces+carterbueford=gmx.net at lists.alioth.debian.org [mailto:sane-devel-bounces+carterbueford=gmx.net at lists.alioth.debian.org] Im Auftrag von carterbueford at

[sane-devel] Unsupported devices

Hi to everybody, the following two scanners are not listed, any chance to get them working? Which backend do I have to use? HP psc-1510 Samsung SCX-4200 Regards Oliver -- Jetzt kostenlos herunterladen: Internet Explorer 8 und Mozilla Firefox 3.5 - sicherer, schneller und einfacher!

[sane-devel] Unsupported devices

Hi, hplib: I am using the sane server on a ASUS router with custom firmware. Linux ASUS_WL500GP 2.4.37.5 #6 2009-09-12 22:32:07 MSD mips GNU/Linux What hplib do I have to use? Samsung: What is the config-file of the xerox_mfp? Thanks! Regards Oliver -Urspr?ngliche Nachricht- Von:

[sane-devel] Installing Problems

Hi, please take a look at the attached logfile. There you'll find the complete aoutput of the make-command. Thanks Oliver Von: Chris Bagwell [mailto:chris at cnpbagwell.com] Gesendet: Sonntag, 20. September 2009 18:27 An: carterbueford at gmx.net Cc: sane-devel at

[sane-devel] Installing Problems

Hi, please take a look at the attached logfile. There you'll find the complete output of the make-command including the errors. Thanks Oliver Von: Chris Bagwell [mailto:chris at cnpbagwell.com] Gesendet: Sonntag, 20. September 2009 18:27 An: carterbueford at gmx.net Cc: sane-devel at

[sane-devel] Installing Problems

Hi, I get the following error during installation of sane-server on my mashine: collect2: ld returned 1 exit status make[2]: *** [libsane-qcam.la] Error 1 make[2]: Leaving directory `/opt/install_dir/sane_install/sane-backends-1.0.20/backend' make[1]: *** [all] Error 2 make[1]: Leaving

[sane-devel] ERROR DURING READ: Error during device I/O PIXMA

Hi everybody, as you told me to get better support with my problem I now compiled the cvs-snapshot on my machine and I now have the PIXMA 0.15.0 installed. I get the following error trying to scan: Error during device I/O PIXMA. Maybe the attached logfile can tell you the reason why. Thanks

[sane-devel] ERROR DURING READ: Error during device I/O PIXMA

Hi everybody, now I succeded in compiling the cvs-snapshot on my mashine and I now have the PIXMA 0.15.0 installed. I get the same error: Error during device I/O PIXMA. Maybe the attached logfile can tell you the reason why. Thanks in advanced. Oliver -Urspr?ngliche Nachricht- Von: m.

[sane-devel] Error during compile

Hi everybody, I get the following error during compiling the cvs-snapshot: Generating manpage scanimage.1... Generating manpage sane-config.1... Generating manpage sane-find-scanner.1... Generating manpage gamma4scanimage.1... Generating manpage sane.7... Generating manpage saned.8... make[1]:

[sane-devel] MP730 driver broken since pixma-0.12.2

Hi, I've got a question on compiling the cvs-snapshot. Do I have to compile all backends? If I use a MP830, is it ok to only compile the pixma and the canon backends an delete the others from the sourcefolder? Thanks Oliver -Urspr?ngliche Nachricht- Von:

[sane-devel] Error during compile

Hi everybody, I get the following error during compiling the cvs-snapshot: Generating manpage scanimage.1... Generating manpage sane-config.1... Generating manpage sane-find-scanner.1... Generating manpage gamma4scanimage.1... Generating manpage sane.7... Generating manpage saned.8... make[1]:

[sane-devel] ERROR DURING READ: Error during device I/O

Hi, I've got the following problem. I set up the sane-server on my WL500gP. Now I try to connect a Canon MP830 to the server. scanimage -L [admin at ASUS_WL500GP root]$ scanimage -L device `pixma:04A91713' is a CANON Canon PIXMA MP830 multi-function peripheral and [admin at

[sane-devel] ERROR DURING READ: Error during device I/O

Hi, thanks for your fast response. That?s what I got. [sanei_debug] Setting debug level of pixma to 21. [pixma] pixma version 0.14.3 [pixma] pixma_collect_devices() found Canon PIXMA MP830 at libusb:003:005 [pixma] pixma_find_scanners() found 1 devices [pixma] pixma_collect_devices() found