I am running SuSE 7.1 and have downloaded and installed the sane backend for
my EPSON 1650 PHOTO.
The following is the output from USBview, which shows two entriesi, each
described as, USB UHCI Root Hub. The first,
shown immediately below has no device attached. The second follows on .....
USB UHCI Root Hub
Serial Number: d800
Speed: 12Mb/s (full)
Number of Ports: 2
Bandwidth allocated: 0 / 900 (0%)
Total number of interrupt requests: 0
Total number of isochronous requests: 0
USB Version: 1.00
Device Class: 09(hub )
Device Subclass: 00
Device Protocol: 00
Maximum Default Endpoint Size: 8
Number of Configurations: 1
Config Number: 1
Number of Interfaces: 1
Attributes: 40
MaxPower Needed: 0mA
Interface Number: 0
Name: hub
Alternate Number: 0
Class: 09(hub )
Sub Class: 0
Protocol: 0
Number of Endpoints: 1
Endpoint Address: 81
Direction: in
Attribute: 3
Type: Int.
Max Packet Size: 8
Interval: 255ms
This is the second displayed entry and lists, EPSON Scanner, the details of
which are shown after the entry described here ....
USB UHCI Root Hub
Serial Number: d400
Speed: 12Mb/s (full)
Number of Ports: 2
Bandwidth allocated: 0 / 900 (0%)
Total number of interrupt requests: 0
Total number of isochronous requests: 0
USB Version: 1.00
Device Class: 09(hub )
Device Subclass: 00
Device Protocol: 00
Maximum Default Endpoint Size: 8
Number of Configurations: 1
Config Number: 1
Number of Interfaces: 1
Attributes: 40
MaxPower Needed: 0mA
Interface Number: 0
Name: hub
Alternate Number: 0
Class: 09(hub )
Sub Class: 0
Protocol: 0
Number of Endpoints: 1
Endpoint Address: 81
Direction: in
Attribute: 3
Type: Int.
Max Packet Size: 8
Interval: 255ms
This is the entry for the scanner itself .....
EPSON Scanner
Manufacturer: EPSON
Speed: 12Mb/s (full)
USB Version: 1.10
Device Class: ff(vend.)
Device Subclass: ff
Device Protocol: ff
Maximum Default Endpoint Size: 8
Number of Configurations: 1
Vendor Id: 04b8
Product Id: 0110
Revision Number: 3.02
Config Number: 1
Number of Interfaces: 1
Attributes: c0
MaxPower Needed: 2mA
Interface Number: 0
Name: (none)
Alternate Number: 0
Class: ff(vend.)
Sub Class: 0
Protocol: 0
Number of Endpoints: 2
Endpoint Address: 01
Direction: out
Attribute: 2
Type: Bulk
Max Packet Size: 64
Interval: 0ms
Endpoint Address: 82
Direction: in
Attribute: 2
Type: Bulk
Max Packet Size: 64
Interval: 0ms
If I run xsane in the terminal, I get the following output:
xsane: no devices available
If I launch the Gimp, and run Xtns - Acquire Image - Scanning (iscan), I get
the following output:
Could not send command to scanner.
Can anyone help me with this please it's driving me mad. Under Windoze
the damn thing works fine.
Thanks
Tim <tcli...@otarkik.com>
--
Tim Cliffe - Managing Director
Otarkik Webscapes
w: http://www.otarkik.com
e: tcli...@otarkik.com
t: +44 (0) 1935 429 319
m: +44 (0) 7776 306 934
E-mail addresses: firstinitiallastn...@otarkik.com
PGP/GPG Fingerprint:
1024D/4482E171 2002-03-20 Tim Cliffe <tcli...@otarkik.com>
key fingerprint = 1A2 02AC B087 F5E5 E9F5 6D54 FC3A 4A12 4482 E171
This message contains confidential information intended only for
the individual named. Any other person should not disseminate,
distribute or copy this e-mail. Please notify the sender
immediately by e-mail if you have received this e-mail by mistake and
delete this e-mail from your system. E-mail transmission cannot be
guaranteed to be secure or error-free as information could be
intercepted, corrupted, lost, destroyed, arrive late or incomplete, or
contain viruses. Ipso facto the sender does not accept liability for
any errors or omissions in the contents of this message, which arise as
a result of e-mail transmission. If verification is required please
request a hard-copy version.
Otarkik Ltd trading as Otarkik Webscapes
29 Eliotts Drive, Yeovil, Somerset.
Company Registration Number 440 000 9
