Thank you Olaf,
My latest testing was with 12.04 (which I had failed to mention). I will
try the epkowa backend as you suggested.
I will keep you posted.
TIA ... TomH
On 08/29/2012 05:44 PM, Olaf Meeuwissen wrote:
> Sorry for the belated follow-up. Just clearing my backlog on the
> mailing li
Sorry for the belated follow-up. Just clearing my backlog on the
mailing list now.
Tom Hunter writes:
> I am trying to get my scanner back operational on Ubuntu. I had to move
> it back to an XP system to continue using it after an upgrade. The
> upgrade was from 10.04 (it may have been 10.1
On Sun, 19 Aug 2012, Tom Hunter wrote:
> I am trying to get my scanner back operational on Ubuntu. I had to
> move it back to an XP system to continue using it after an
> upgrade. The upgrade was from 10.04 (it may have been 10.10) to
> 11.xx and later (yes its been a while,
I've tried to migrat
Hi ...
I am trying to get my scanner back operational on Ubuntu. I had to move
it back to an XP system to continue using it after an upgrade. The
upgrade was from 10.04 (it may have been 10.10) to 11.xx and later (yes
its been a while, I have posted on the Ubuntu list on this with some
respon
Hi,
On Tue, Sep 03, 2002 at 09:42:08AM -0400, powlow wrote:
> i have an 'epson perfection 1650 photo' scanner and have just
> reinstalled my machine with red hat 7.3 with all the relevant updates.
>
> when my computer is booting, the scanner (usb) seems to be polled as
> the main light blinks (
Ooops, I must have missed the original mail.
Henning listed the most likely problem, but it's also possible that
the premissions on the device file (/dev/usb/scanner0) are not set
for read and write access. You can find out if this is the case by
either looking at the output of ls -l /dev/usb/scan
Hi,
am new here so i'll introduce myself.
allow myself to introduce.myself
my name is Paulo and i live in Lisbon, Portugal.
i have an 'epson perfection 1650 photo' scanner and have just
reinstalled my machine with red hat 7.3 with all the relevant updates.
when my computer is booting, the s
On Tue, 14 May 2002, Karl Heinz Kremer wrote:
Hi,
>
> I don't remember
> what kernel was distributed with 7.2, or if the 1650 was fully supported
> in Sane 1.0.6.
Due to kernel issues my 1650 was not working even on SuSE Linux 7.3 - 8.0 is
IMHO the first SuSE distribution that comes with a kerne
Karl Heinz Kremer wrote:
>Alexandre Suter said:
>[ ... ]
>
>>or else download the source code and install it after having removed all
>>rpms...
>>
>
>This may be not as easy as you think. Depending on which RPMs are installed
>on the SuSE 7.2 system, the compilation of both Sane and Xane may fai
paul beard wrote:
>
>
> STEPHEN CONSTANTINOU wrote:
>
>>
>> I got a message "libgimp-1.2.so.0 is needed by sane-1.06-1" and there
>> it stopped.
>> I went to yast2 and did a search of the Install Software module and
>> could not find "libgimp-1.2.so.0". The scanner was attached at the
>> time.
Alexandre Suter said:
[ ... ]
> >
>
> or else download the source code and install it after having removed all
> rpms...
This may be not as easy as you think. Depending on which RPMs are installed
on the SuSE 7.2 system, the compilation of both Sane and Xane may fail.
The problem is that most s
Dear All
I am a very experienced Windows user who is looking to go over to Linux and
this is the third time that I have installed a version of Suse, each time
learning a little and relapsing back to Windows.
My hope is that most of my hardware will work with Suse 7.2. At that stage I
will then
STEPHEN CONSTANTINOU wrote:
>
> I got a message "libgimp-1.2.so.0 is needed by sane-1.06-1" and there it
> stopped.
> I went to yast2 and did a search of the Install Software module and could not
> find "libgimp-1.2.so.0". The scanner was attached at the time.
>
> I have little doubt that I h
I am running SuSE 7.1 and have downloaded and installed the sane backend for
my EPSON 1650 PHOTO.
The following is the output from USBview, which shows two entriesi, each
described as, USB UHCI Root Hub. The first,
shown immediately below has no device attached. The second follows on .
USB UH
Hi there,
I am trying to use an Epson Perfection 1650 Photo USB scanner.
I am running SuSE 7.0, Kernel 2.2.19 and Sane 1.07.
To install the scanner I follwed the USB guide by Brad Hards:
The modules usbcore, usb-uhci and scanner (with vendor=Ox04b8 product=0x110)
can be
loaded without any pro
--fXStkuK2IQBfcDe+
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
Content-Transfer-Encoding: quoted-printable
Do you have the original Sane installation from SuSE 7.0 on your sytstem?
If so, please remove it and give it another try.=20
I don't remember how the USB modules
16 matches
Mail list logo
