Hello list and Henning,
For Canon LiDE 35 or 50:
What steps are to be followed to gain access to the calibration area?
I have seen on Ebay that Canon sells separately a service manual on
a compact disk. Does anyone know if that disk would contain the
instructions to service that scanner?
Gerald Murray schrieb:
Quoting Pierre Willenbrock pie...@pirsoft.dnsalias.org:
Hi Gerald,
Gerald Murray schrieb:
Tested:
LiDE 35: 150,300,600,1200 using usb-1.1.
--snip--
That is probably a calibration problem. There is no easy way to fix
that. What helped Henning was to clean the
Pierre wrote:
So, if you own a scanner of the Canon LiDE 35/40/50/60 series, please
try the code from the experimental module. The low power mode is used
when scanning at resolutions =600dpi, and during calibration. Errors
are most likely when the scanner does a fast feed to the scanning area.
Hi Gerald,
Gerald Murray schrieb:
Tested:
LiDE 35: 150,300,600,1200 using usb-1.1.
Motor ok. Scans at 150,300 are excellent quality.
At 600, 1200 minor image flaws: there is faint but noticable streaks
down the longest length of the image, from color reception or brightness
not being
Hi,
On 4/24/06, Pierre Willenbrock pie...@pirsoft.dnsalias.org wrote:
Hi List,
as some of you may have noticed, the genesys backend now has the ability
to set a motor power level, leading to much quieter scans in high dpi
modes(if it is implemented for the scanner).
This feature is currently
Hi,
Parag N() schrieb:
Is that experimental module can be used with HP 2400 scanner also?
It can be used for development and other experimental code. So, yes, the
experimental cvs module can be used for developing support for the HP
2400 scanner. But no, there is no code supporting
Hi List,
as some of you may have noticed, the genesys backend now has the ability
to set a motor power level, leading to much quieter scans in high dpi
modes(if it is implemented for the scanner).
This feature is currently available in the experimental module, as the
settings for this new mode