I didn't think there was a conflict at all between N and CWT/BWT. N is how
long the reader waits before sending the next byte. CWT is how long it
waits before giving up on receiving the next byte. BWT is how long it waits
before giving up on receiving the next block.
Also, I'm not getting the
: "Jim Rees" <[EMAIL PROTECTED]>
To: "Smart Muscleheads" <[EMAIL PROTECTED]>
Sent: Friday, June 29, 2001 1:47 PM
Subject: Re: MUSCLE Error using an IBM MFC in GemPlus readers.
> The Gemplus reader shouldn't wimp out just because BWT is "reserved."
27;IBM'
>
> I seem to remember that the IBM MFC card is an ETSI TE9 / CEN EN726
> (telecoms standard) card, and not an ISO 7816 card...
>
> Peter T
> Bristol UK
>
> - Original Message -
> From: "Rich Wareham" <[EMAIL PROTECTED]>
&g
Mahlzeit
On Fri, Jun 29, 2001 at 08:47:57AM -0400, Jim Rees wrote:
> The Gemplus reader shouldn't wimp out just because BWT is "reserved." My
> Todos driver does its best to talk to the card and uses defaults when the
> protocol parameters don't make sense. There are an amazing number of cards
The Gemplus reader shouldn't wimp out just because BWT is "reserved." My
Todos driver does its best to talk to the card and uses defaults when the
protocol parameters don't make sense. There are an amazing number of cards
out there that aren't strictly 7816 compliant.
Besides, isn't BWT given b
ISO 7816 card.
Peter T
Bristol UK
- Original Message -
From: "Rich Wareham" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Friday, June 29, 2001 9:49 AM
Subject: MUSCLE Error using an IBM MFC in GemPlus readers.
>
> Hello,
>
> I am currently port
MAIL PROTECTED]>
Sent: Friday, June 29, 2001 9:49 AM
Subject: MUSCLE Error using an IBM MFC in GemPlus readers.
>
> Hello,
>
> I am currently porting some Windows software for the management of
> smartcards over to Linux, the cards in question are IBM MFC 4.22 smart
> cards. I g
Hello,
I am currently porting some Windows software for the management of
smartcards over to Linux, the cards in question are IBM MFC 4.22 smart
cards. I get the same error on card power up from both the GemPlus 410
serial and GemPlus 430 USB card reader when using the PCSClite drivers. In
both